With 8 years experience wood pellet machine/ wood pellet mill
Ruiguang ISO 9001 approval wood pellet machine
1. It is widely used for pellet of light substance, such as wood chips, sawdust, straw, pasture, chrysanthemum, palm leaf and so on;
2. The feeder’s especial structure makes materials conveyed evenly, it is specially designed for pellet of light substance with the density of 0.3-0.6g/ cm3;
3. Feeder, conditioner and chute are made of stainless steel with long service life;
4. It is with magnet and over load protection system, which can protect machine well during production;
5. Feeder is with a variable speed controlled to meet different outputs requirements;
6. It makes gear directly-connecting as the driver, and is with quick-release die fixed by clamps, which can increase the output 15% more than the same type machine with belt-convey;
7. The bearing and oil seal in the main drive are imported from Japan to ensure highly-efficient, stability, credibility;
8. The alloy steel die is with international advanced equipment and technics, and has long service life, slippery pellet and high quality.
Brief introduction of sunflower stalk pellet mill
1.This serious of wood pellet machine are mainly used for making the wood pellets applies for raw material like wood waste or agricultural waste, such as corn/wheat/rice straw, coffee/peanut shell, etc. The pellets are used as fuels in electricity-generating and water –heating in power plant industry, boiler factories, etc.
2.They adopt the imperative feeding device, reinforced conveyed parts, dedicated ring die, compression roller and hoop.
The main features of sunflower stalk pellet mill
1.The main drive of our wood pellet machine adopts the high accuracy gear driving, so the output is 20% more than the belt drive.It makes gear directly-connecting as the driver, and is with quick-release die fixed by clamps, which can increase the output 15% more than the same type machine with belt-convey.
2.It uses the SKF bearings, NAK oil seal to make sure the high-efficiency, stable performance and low noisy of the whole machine. And it uses the Siemens or Wannan brand of motor.
3.The pelletizing chamber is equipped with air suction cooling system.
4.The feeder of our wood pellet machine uses variable-frequency and variable-speed motor to make sure the good quality of the pellet.
5.Advanced world standard compensatory S-shaped coupling with the structure of novel, compact, safe, low-noisy and low fault.
6.Feeder, conditioner and chute of our wood pellet machine made of stainless steel with long service life.
7.Our wood pellet machine with magnet and over load protection system, which can protect machine well during production
8.We have different bore diameter of the ring dies for your choice. And the feeder is with a variable speed controlled to meet different outputs requirements.
Technical data of sunflower stalk pellet mill:
| SDLY-320 | SDLY-350 | SDLY-420 | SDLY-508 | SDLY-558 | |
| Output(kg/h) | 400-600kg/h | 500-700kg/h | 1100-1300kg/h | 1500-2000kg/h | 2500-3200kg/h |
| Power(kw) | 37kw | 55kw | 90kw | 132kw | 190kw |
| Feed Power(kw) | 0.75kw | 1.1kw | 1.5kw | 2.2kw | 2.2kw |
| Mould NO. | 1 Pcs | 1 Pcs | 1 Pcs | 1 Pcs | 1 Pcs |
| Roller NO. | 2 Pcs | 2 Pcs | 2 Pcs | 2 Pcs | 2 Pcs |
| Diemension(mm) | 2100*800*1300 | 3200*1100*1700 | 3200*1100*1700 | 3200*1300*1900 | 3500*1500*2800 |
| Weight(kg) | 2100kg | 2500kg | 3100kg | 3500kg | 4000kg |
Biomass Pellet Machine, used to make biomass wood pellet, is popular with industrial furnance and home warming stove heating.
Raw Materials: The raw materials are widely seen, such as wood chips, crop straw, grass, and bamboo powder and so on. The raw materials should meet the requirement of both the moisture between 10%--20% and length ranges below 5mm.
Detailed Features:
1. It can be stored for a long time and improve poultry dainty and assimilation function.
2. It also can shorten the period of feeding, so it can efficiently guarantee many users' productive cost.
3. It adopts screw-center adjusting pressure structure; the pressed roller's gap can be adjusted slall or big , s oit can meet the different materials demand and make sure the pelleting effect.