Product Details

M7130H Surface Grinding Machine

1.The machinse can be used for grinding slot and flange side.

2.The crossfeed movement of wheelhead can be carried out either manually or hydraulically, convenient for operation.

3. A rapid elevation mechanism is used for vertical movement of the wheelhead.

4.The grinding head and the oil pump both employ the Y series motor, carrying out the National safety standard for electric equipments.

5.With the attractive appearance, there is the position on the machine for installing digital-display device.

Model				M7130H
Table	Table Size(width ×length)		mm	300×1000
	Maximum Grinding Size (Width×Length×Height)		mm	300×1000×400
	Table Longitudinal Travel(Maximum)		mm	1100
	Table Speed (Stepless)		m/min	3-27
	Table T-Slot Quantity×Width			3×18
	Load of Table		kg	468
Wheelhead	The Maximum Distance from Table to Wheel Spindle Center		mm	575
	The Intermittent crossfeed of Wheelhead per travel		mm	3-30
	Wheel Spindle Speed		rpm	1440
	Vertical Feed Handwheel Dial &#118alue		mm	0.01
	Handwheel Head Feed per round	Vertical Feed	mm	1.29
		Horizontal Feed	mm	8
	Grinding Wheel Size( Outside Diameter×Width ×Inner Diameter)		mm	φ350×40×φ127
Motor Power	Total Motor Power		kw	7.62
	Wheelhead Motor Power		kw	4.5
Work Precision	Parallelism of surface ground with the datum surface		mm	300:0.005
	Surface roughness		µm	Ra0.63
Weight of Machine Tool	Net Weight		kg	3500
	Gross Weight		kg	5000
Overall Dimensions (Length×Width×Height)			mm	2295×1673×2035
Container Size (Length×Width×Height)			mm	2800×1830×2480