Specifications

pipe bending machine
Roll and bend all kinds of sections
NC system,hydraulic control
High efficiency,accuracy +_0.1mm

pipe pipe pipe bending machine

Specification:

Colour:gray

Automatic:Hydraulic

Hydraulic pipe bending machine

Bend type:stainless steel,angle steel,steel bar,flat steel,channel steel,all kinds of copper,aluminium, stainless steel profiles and tubes&pipes

Operating system:hydraulic

Total hydraulic flexible profile bending machine

1.Perfectly complete pre-bending,rolled-up,roll calibrate.

2.Working principle: two down rollers as main driving roller,or all three rollers as main driving roller,with upper roller fixed and two down rollers do up-and-town movement around one fixed center.

3..Triple geared drive,low voltage driver,low current consumption and high efficiency.

4.Well hydraulic control,displacement liquid-crystal display with accuracy+_0.1mm

5.The two touch steel stick can permit the good finishing quality of asymmetric plate section bending.

6.Advanced and compact structure with full function.

7.The machine has six oil tanks(two big oil tanks,four small oil tanks),and the head is vertically.

8.The yield strength bended profile with 320Mpa (Max.).

9.Full function,complicated structure,high precision and very stronger.

No.	Technical Data	W24S-38
1	Max. Bending resistant modulus	45CM3
2	Yield limit	245Mpa
3	Mould Diameter	different specification Profile matches with different specification mold
4	Down roller speed	120-150mm/ min
5	Min. Rolling diameter under full load condition	Depends on the profile material
6	Shaft diameter	120 mm
7	Drive roller diameter	320 mm
8	Bending speed	6m/min
9	Hydraulic pressure	40Mpa
10	Motor	15KW
11	Hydraulic Device	Yuken
12	Control Device (PLC)	Siemens
13	Electrical Components	Siemens
14	Touch screen	Weinview
15	Weight	6800Kg
16	Outside dimension	2250x1880x1650mm