Product Details

Fasteners earth stud bolt isuzu wheel stud bolt made in china duplex steel uns s31803

DUPLEX 2205

ASTM A 182, A 240, A 276,
A 789, A 790, A 815
UNS S31803, S32205
NACE MR0175

2205 Duplex Overview

Duplex 2205 is a nitrogen enhanced duplex stainless steel that was developed to combat common corrosion problems encountered with the 300 series stainless steels. “Duplex” describes a family of stainless steels that are neither fully austenitic, like 304 stainless, nor purely ferritic, like 430 stainless. The structure of 2205 duplex stainless steel consists of austenite pools surrounded by a continuous ferrite phase. In the annealed condition, 2205 contains approximately 40-50% ferrite. Often referred to as the work horse grade, 2205 is the most widely used grade in the duplex family of stainless steels.

The advantage of a duplex structure is that it combines the favorable qualities of a ferritic alloy (stress corrosion cracking resistance and high strength) with those of an austenitic alloy (ease of fabrication and corrosion resistance).

Usage of 2205 Duplex stainless steel should be limited to temperatures below 600° F. Extended elevated temperature exposure can embrittle 2205 stainless.

Corrosion Resistance

2205 duplex stainless steel is a cost effective solution for many applications where the 300 series stainless steels are susceptible to chloride stress corrosion cracking. Stress corrosion cracking occurs when stainless steels are subjected to tensile stress, while in contact with solutions containing chlorides. Increasing temperatures also increase the susceptibility of stainless steels to stress corrosion cracking.

The combination of chromium, molybdenum and nitrogen convey the good resistance of 2205 to chloride pitting and crevice corrosion. This resistance is extremely important for services such as marine environments, brackish water, bleaching operations, closed loop water systems and some food processing applications. The high chromium, molybdenum and nitrogen contents of 2205 provide corrosion resistance superior to common stainless steels, such as, 316L and 317L in most environments.

Chemical Composition, %

Cr	Ni	Mo	C	N
22.0-23.0	4.50-6.50	3.00-3.50	.030 Max	0.14-0.20
Mn	Si	P	S	Fe
2.00 Max	1.00 Max	.030 Max	.020 Max	Balance

In what applications is Duplex 2205 used?

Chemical process vessels, piping and heat exchangers
Pulp mill digesters, bleach washers, chip pre-steaming vessels
Food processing equipment
Oil field piping and heat exchangers
Flue gas desulfurization equipment

ASTM Specifications

Pipe Smls	Pipe Welded	Tube Smls	Tube Welded	Sheet/Plate	Bar	Flanges, Fittings & Valves
A790	A790	A789	A789	A240	A276	A182

Mechanical Properties
Specified Tensile Properties ASTM A240

Ultimate Tensile Strength, ksi Minimum	.2% Yield Strength, ksi Minimum	Hardness Max.
95	65	31 Rockwell C

1)Size and type:

Hexagon Bolt: M6-M64 full thread or half thread
Hexagon Nut: M3-M64
Threaded Rod:4-2000mm
Plain washers:M3-M64
And heavy hex bolts and nuts with all sizes

2)Treatment: cold forging

1. Materials option: Stainless Steel C276, 904L, 304, 304L, 310S, 316, 316L, 321, 317L, 2507, 2205, 254SMO, AL6XN, 1. 4501, 1. 4529.

Super duplex stainless steel F55, F51, F53 HastelloyB & C, Inconel, Incoloy etc.

2. Standards: GB, DIN, JIS, AISI/ASTM/ANSI/AMSE and BS EN, etc.

3. Packing: Cartons then pallet, or wooden box, or by clients' requirements.

4. Exported countries: United States, Germany, Saudi Arabia, South Korea, etc.

5. factory price, accept small order and short delivery time1

Our Factory:

our inspection machine pictures:

Packing:

Other product:

DUPLEX 2205

ASTM A 182, A 240, A 276, A 789, A 790, A 815UNS S31803, S32205NACE MR0175

ASTM A 182, A 240, A 276,
A 789, A 790, A 815
UNS S31803, S32205
NACE MR0175