Product Details

310S drywall screw UNS S31008 drywall screw EN1.4845 drywall screw 309S /1.4835

STAINLESS STEEL 310/310S

ASTM A 240, A 276, A 312
UNS S31000 / UNS S31008
DIN 1.4845

Stainless steel 310/310S is an austenitic heat resistant alloy with excellent resistance to oxidation under mildly cyclic conditions through 2000ºF. Its high chromium and nickel contents provide comparable corrosion resistance, superior resistance to oxidation and the retention of a larger fraction of room temperature strength than the common austenitic alloys like Type 304. Stainless 310 is often used at cryogenic temperatures, with excellent toughness to -450°F, and low magnetic permeability.

310 UNS S31000 Chemical Composition, %

Cr	Ni	C	Si	Mn
24.0-26.0	19.2-22.0	.25 Max	1.50 Max	2.00 Max
P	S	Mo	Cu	Fe
.045 Max	.03 Max	.75 Max	.50 Max	Balance

310S UNS S31008 Chemical Composition, %

Cr	Ni	C	Si	Mn
24.0-26.0	19.2-22.0	.08 Max	1.50 Max	2.00 Max
P	S	Mo	Cu	Fe
.045 Max	.03 Max	.75 Max	.50 Max	Balance

Fastener Type		bolt&nut/screw/stud bolt//threaded rod/washer
Bolt	Type	Hex head bolt; hex socket head bolt; square head bolt; U-bolt; T-bolt; round head bolt;Machine bolt; expansion bolt; CSK Head square carriage bolt; eye bolt;
	Specification	Threads diameter: M6-M64. length: 10mm-500mm
	Standard	DIN931;DIN933;DIN975;DIN976;DIN915;DIN316;DIN444; DIN580; DIN916; DIN914; DIN913; DIN912
Screw	Type	hex screw; hex socket cap screw;hex socket countersunk head screw
	Specification	M6-M64 length: 6-500mm
	Standard	DIN913; DIN912; DIN 7984;DIN 933; DIN84; DIN85; DIN7972; DIN694; DIN7971; DIN7973
Nut	Type	Hex nut;square nut; wing nut; weld nut; Coupling nut; Cap nut; flat nut; lock nut;half nut; full nut;
	Specification	M6-M64
	Machining	CNC turning, , CNC milling, CNC drilling and CNC boring by vertical CNC machine and Horizontal CNC machine
	Standard	DIN 934; DIN 439; DIN315; DIN985; DIN928; DIN929; DIN582; DIN6334; DIN917
Washer	Type	Plain washer; flat washer; spring washer;square washer; slant washer; wave washer
	Specification	M6-M64
	Standards	DIN125, DIN435, DIN9021, DIN433, DIN440R, DIN1440,DIN1441, DIN93, DIN7349, DIN1052, DIN988; DIN7603; DIN137A, DIN137B; DIN6769; DIN6797J; F436; DIN6798V; DIN 127B,ANSI18.21.1,DIN127A,DIN7980; DIN6798J;DIN6798A;ROUND WASHERS WITHOUT HOLE,BS4320 F/B,NFE25514Z/M/L/LL, IFI NARROW/WIDE