Specifications

Spot Diamond Blade for General Masonry Material
1.good quality low price
2.low noise
3.long working lifetime

Spot Diamond Blade for General Masonry Material ----MAAC

 

 

 

 

 

Normal cutting speed( for dia.105mm):

	grade 00	grade 01	grade 02	grade 03	grade 04	grade 05
speed: (m/min)	0.8-1.0	1.0-1.5	1.5-2.0	2.0-2.3	2.3-2.8	>2.8

Bond choice as per the table below( for dia.105mm):

type	grade 00	grade 01	grade 02	grade 03	grade 04	grade 05
Fast cutting			XGA-02-002AD (XGS3) (1.6-1.7m/min) JWGA-02-002AD (YGS3) (1.6m/min)			XGA-05-002AD (XGS5) (2.8-3.0m/min) XGA-05-002AD (XGS6) (2.8-3.0m/min)
Normal	HGA-00-002A(HGS6) (0.8-0.9m/min) JWGA-00-002A (YGS4) (0.9-1.0m/min)	JWGA-01-002A (YGS1) (1.1-1.2m/min)	HGA-02-002A (HGS3) (1.5-1.6m/min) XGA-02-002A (XGS2) (1.4.-1.5m/min)	RGA-03-002A (RGS) (2.0~2.1m/min)	XGA-04-002A (XGS4) (2.5-2.6M/MIN) HGA-04-002A (HGS5) (2.2~2.3m/min)
Long life			XGA-02-002AB (XGS1) (1.4-1.5m/min)

* Cutting performance may be different against actual application, all information above only from the cutting in laboratory in RobtoL & RobLion.

Super thin turbo blade for ceramic/tile (1.30mm thickness only!)

Feature and benefit:

1. cutting speed (200%-300% faster)
1.5-3 meter/min! This is a extremely fast cutting speed! Cause it is 200%-300% faster than normal ceramic/tile blade.

2. cutting life (100%-200% longer)
600-800 meter! This is extremely long life! Cause it is 100%-200% longer than the normal ceramic blade.

3. smooth cutting edge without chipping
It is extremely smooth cutting edge without chipping! It may be met your high quality installation requirement!