High Pressure Micro-mist Humidifier use high pressure piston pump to increase the water pressure up to 4-7Mpa and pressurized water through high pressure pipeline by professional nozzle to spray out, the 2-6 μm micro-mist water particles will enabling them to rapidly complete the vaporization absorbs heat from the air and spread, so as to complete air humidification and cooling purposes.

Advantages:

1. All intelligent control, without special maintenance.

2. 100m remote control function available.

3. Low noise.

4. No drip from the tube when powered off.

5. Super large water tank, made of stainless steel.

6. Distribution cabinets, control system, linkage, cistern is all-in-one machine.

7. 9 series main products, 1000 kinds of tie-in way.

8. Automatically self-cleaning nozzles.

9. The whole system service life can be as long as 8-10 years(nozzle and filter cartridge are not including)

Humidifier is mainly used in weaving cloth, cotton spinning, chemical fiber, bast fiber and other textile industry, as well as printing, papermaking, tobacco, chemical, edible fungi, artificial fog engineering, refrigeration storage etc.. As long as more than 500 square of space need to be humidified, no other using limits, a large capacity humidifier can control 800-3000 square meters.

Main Functions: 

Textile industry: humidification, moisture regain, anti-static, avoid yarn disconnection.

Paper mill industry: anti-static, dedusting, prevent paper wrinkle, improve paper quality.

Artificial fog program: dedusting, humidification, change microclimate, creating beauty.

Tobacco industry: prevent tobacco breakage, increase weight.

Fruit refrigeration storage: keeping fresh, good taste and weight.

The installation drawings:

  The applicable scope:

Cold storage humidifiers and humidity control:

When air enters a cold store, its moisture content drops as its temperature falls below dew point and water condenses on to the cold surfaces, particularly the cooling coils in the refrigeration system.

As the air circulates around the chill store it warms, reducing its relative humidity. The warmer air draws moisture from any surface it can, including the produce itself.

This leads to product weight loss - as much as 20% - and cells become less turgid, affecting the appearance, quality and shelf-life of the produce, all of which reduce the value of the stock.

The solution? Raise the relative humidity to a level that's in equilibrium with the produce.

Optimal conditions vary according to the specific type of fruit, vegetables, flowers or other food product being stored but, typically, a humidity of around 95%RH at a temperature just above freezing is needed but, even produce stored in warmer conditions benefit from a humidity level around 75%RH.

The required moisture is introduced directly into the air, evenly throughout the store.

The story doesn't stop there.

Commercial markets and the many modern distribution depots run by supermarket chains benefit from effective humidification, as do chilled display cabinets and open counters, helping to ensure that produce quality is maintained right through the supply chain.

Benefits of humidification in food and produce cold stores include:

• Raising the relative humidity inhibits moisture loss.
• The right humidity level ensures that product quality is maintained.
• Fresh, just picked appearance increases value.
• Improved profitability through maintained product weight.
• Longer storage and greater shelf life reduce waste.
• Direct room humidification ensures the right humidity level evenly around the store, maintaining produce quality throughout.
• Close humidity control means the right humidity for the right produce.

Standard export packing is plastic bags with foam inside and carton or wooden case outside, then packed onto plastic pallet for container, If you have some specific requirements, just tell us, and we will do our best to satisfy you.

The delivery time is 25-30 days after the sample is confirmed.

AceFog is the recognized top manufacturer of industrial humidification system in China.

AceFog focus on research and development, manufacture, and sale of humidifying, air cooling, dedusting, dehumidifying and energy saving equipment. Our factory has three large workshops, covering 3,0000 squre meter area. We have more than 100 employees, equip with professional R&D team, reliable workers and efficient sales service team.

Our company is evolving as the change of customers’ needs, we are committed to developing and engineering new technology to best suit our customers’ demands. So far, we have got many patents on highly advanced and efficient humidifier designs.

Q: How long can I get my product after payment?

A: We would delivery within 5-15 days after clients' payment received.

Q: What is your after-sales services?
A: 1. We would supply the free maintenance within 12 months guarantee.
    2. We would supply the professional solutions during using.

Q: In the using processing, if i have some problem, how to solve it?

A: You can send me the email or call me, and send me the picture or video to me, I will let our engineer help you solve it.

Q: Are you a trading company or manufacturer?

A: As the largest manufacture of humidifier system, we are now taking the leading position of cooling industry in 

mainland China. 

Q: Can I visit your factory?

A: We warmly welcome you come to visit us at Zhengzhou city, Henan province. Contact us for more.

Q: Do you accept OEM?

A: Yes, we can accept OEM, and we have the professional R&D team to help you achieving your designs. 

Q: Do you accept ODM?

A: We welcome ODM, we have professional engineers team to help you with the design of the dehumidifiers and to provide you the professional suggestion with the dehumidifiers you want.

Q: Can I buy a sample for testing?

A: Yes, we can supply you with a sample. For most of the models, we have them in stock. We can supply you with the sample within 2 days after we get your payment.