Product Details

Good quality small granulator machine Floating Fish Feed Pelleter Mill

Product Description

I. Introduction of Floating Fish Feed Pelleter Mill:

***Our floating Fish Feed Pelleter Mill is widely used for producing grains into the pet feed (such as cat feed, dog feed, bird feed and so on) and the fish food (including floating fish feed and sinking fish feed). The puffing fish feed pellets can float on the water surface without dissolution for over 12 hours.

*** In order to meet different customer demand, we launched two types of machines: Dry type and Wet type.

The different between dry type fish feed machine and wet type fish feed machine:

Description	Dry type fish feed machine	Wet type fish feed machine
Working Principle	1. Firstly, the material is sent into feeding device 2. Then they will be pressed by the screw shaft with high pressure and temperature which makes the raw material fully cooked and sterilized. 3. Finally pressed material will be formed into pellets by shaping mould.	1. This type machine need a steam boiler as supporting device to work, extruder also install conditioner connected by pipes and boilers 2. Firstly, raw materials will get into the conditioner after grinded and mixed to pre-cooked quenched with steam; 3. Then enter into the extruder, squeeze into pellets.
Corollary Equipment	none	Steam Boiler
Pellets	/	Pellets are more meticulous & good looking
Operation	Easy and Simple	A little complicated
Price	Low	A little higher than dry type
Capacity	Wet type machine has high yield than dry	type machine in the same power.

2. Raw Material of Floating Fish Feed Pelleter Mill

Our fish feed pellet granulator is based on the raw material of corn meal, flour, Wheat middling, Wheat bran, rice bran, soybean meal, cottonseed meal, fish meal, bone meal, meat meal and etc. Then the material can be expanded to pellet feed which is different shaped, unique taste and rich nutrition, suitable for dog, cat, fish, bird, rabbit fox etc.

3. Finally production of using our Floating Fish Feed Pelleter Mill

1. The floating time can reach 24 Hours, which can be seen clearly by you and it won’t waste feed.

2. It’s easy to be digested for animals, especially fish.

3. The sterilization effect of fish feed extruder is better to avoid gastrointestinal disease.

4. Aquaculture feed are generally required to put in water, and aquatic animal feeding time is longer, in order to reduce the feed loss in the water and water pollution, the feed is maximized the stability of the feed in the water.

Technical parameters

4. Technical parameters and Picture of Floating Fish Feed Pelleter Mill

Dry type Floating Fish Feed Pelleter Mill

Model	Capacity (T/H)	Motor Power (kw)	Feeding Power (kw)	Screw Diameter (mm)	Cutting Power (kw)
AZSG-40C	0.03-0.04	5.5	0.4	φ40	0.4
AZSG-50C	0.06-0.08	11	0.4	φ50	0.4
AZSG-60C	0.12-0.15	15	0.4	φ60	0.4
AZSG-70B	0.18-0.2	18.5	0.4	φ70	0.4
AZSG-80B	0.2-0.25	22	0.4	φ80	0.6
AZSG-90B	0.32-0.35	37	0.6	φ90	0.8
AZSG-120B	0.5-0.6	55	1.1	φ120	2.2
AZSG-135B	0.7-0.8	75	1.1	φ133	2.2
AZSG-160B	1-1.2	90	1.5	φ155	3.0
AZSG-200B	1.8-2.0	132	1.5	φ195	3.0-4.0

Wet Type Floating Fish Feed Pelleter Mill

Model	Capacity (T/H)	Main Power (kw)	Feeding Power (kw)	Screw Diameter (mm)	Cutting Power (kw)	Conditioner Power (kw)
AZSS-60B	0.18-0.2	15	0.4	φ60	0.4	0.75
AZSS-70B	0.25-0.30	18.5	0.6	φ70	0.6	0.75
AZSS-80B	0.35-0.40	22	1.1	φ80	0.8	1.1-1.5
AZSS-90B	0.50-0.60	37	1.1	φ90	1.1	2.2
AZSS-120B	0.70-0.80	55	1.1	φ120	1.5	2.2-3.0
AZSS-135B	1.0-1.2	75	1.5	φ135	2.2	3.0-4.0
AZSS-160B	1.8-2.0	90	2.2	φ155	2.2-3.0	4.0-5.5
AZSS-200B	3.0-4.0	132	2.2	φ195	3.0-4.0	5.5

Features

5. Features of Floating Fish Feed Pelleter Mill

1) Pellets can keep floating for 24 hours without pollution to water.
2) Our floating Fish Feed Pelleter Mill can make pellet from dia.1.0mm-20mm just by changing the mold.
4) The cutting device can make pellets of different length.
5) The floating Fish Feed Pelleter Mill needs a boiler device.
6) We can provide whole floating fish feed making machine plant for you

7) Electric heating device is adopted which can improve the feed expansion rate and pellets floating time.
8) High temperature and high pressure cooking process can kill the salmonellosis and bacterial infections and also makes the pellets easily to digest.

Feed production line

6. Floating fish feed extruder machine line

The floating fish feed production line is goes as follows:

Material crushing----mixing----pellets extruding---pellet drying---pellet cooling---pellet packing.

1) Crusher----To crush the raw material into powder. The powder fineness kept in 60-80 mesh.

2) Mixer -------To make all kinds of powder mixed evenly. The moisture content of the powder is 20%-25%.

3) Extruder----To make many kinds of feed pellet. Such as fish feed (floating tpye and sinking type), pet feed.

4) Dryer--------To remove the extra moisture of the pellet.

5) Cooler------ To reduce the temperature of the pellet after dring.

6) Packaging-- After cooling the feed pellet, we could package it.

*** Except all above machines, this line will need other equipment, such as storage bin, conveyor, Pneumatic conveying systems, unloader, fans, hanging feeder and so on.

*** We could help the customers to design the whole fish feed production line for floating fish feed production, and make sure the automatic operation with electric control, meet the demand of commercial production.

Delivery

1. The floating Fish Feed Pelleter Mill will be sent to you by sea, by air or even by International courier service.
2. The dievery time is usually 20-25 days upon receipt of your depoist or LC.

Our Services

1. The warranty time is one year from the date you get the floating Fish Feed Pelleter Mill, except the easy-wear parts.
2. If any parts are found defective in quality in the first year, we shall replace it freely.
3. We are responsible for the smooth operation of the floating Fish Feed Pelleter Mill. If you have any problem during production, just feel free to contact us. We assure you our soonest response.

Company Information

Zhengzhou Azeus Machinery Co., Ltd is a professional supplier of the different kind of floating Fish Feed Pelleter Mill. Our products has been exported to all over the world, Especially to Europe, North and South America, Africa, East and South Asia, Australia, New Zealand, etc.

Through our joint efforts, we have gained good reputation from our clients in communication, products quality, delivery, after-service, and other aspects.

We are looking forward to establishing a long-term and mutual-benefit business relationship with all of you. We will assure you our competitive price with better quality and service. We believe you will get what you expect from our company.

7. FAQ of our Floating Fish Feed Pelleter Mill

1. What is the size of the final fish feed pellet?
- the fish feed pellet is 0.9-15mm size, you can choose the size you prefer.
2. The fish feed pellet machine is a single machine or a complete production line?
-It is depend on your chooice. the floating fish feed extruder machine can working seperatly, also in a production line, from material crushing to final pellet packing. You can choose it freely.
3. What is the delivery time of the Floating Fish Feed Pelleter Mill?
- Usually the single machine can be sent within 15 days after getting the deposit. If it is a large order or production line, the time maybe longer.

8. We will appreciated if these following 2 tips contained in your inquiry
Tips 1. The model you prefer is:
Tips 2. The capacity of the machine you need is:

9 . Please feel free to ask us any questions with our Floating Fish Feed Pelleter Mill