Specifications

M1306B Dual Band GSM modem (EGSM900/1800MHz) designed for data, fax, SMS and voice applications
Fully Type Approved
Fully com

Wavecom Fastrack M1306B GSM/GPRS Modem

PRODUCT FEATURES

• Dual Band GSM modem (EGSM900/1800MHz) designed for data, fax, SMS and voice applications
• Fully Type Approved
• Fully compliant with ETSI GSM Phase 2+ Small MS  

Output power:

•  Class 4 (2W @ 900 MHz)
• Class 1 (1W @ 1800 MHz)  

Power supply:

• Input voltage: 5V-32V
• 5mA in idle mode, 140mA in communication GSM 900 @ 12V
• 5mA in idle mode, 100mA in communication GSM 1800 @ 12V
• Peak 1,7A @ 5.5V
• Overall dimensions: 73 x 54 x 25mm
• Weight: 82g  

VOICE, DATA/FAX, SHORT MESSAGE SERVICES

 

 

Voice features:

• Telephony
• Emergency calls
• Full Rate, Enhanced Full Rate and Half Rate (FR/EFR/HR)
• Dual Tone Multi Frequency Function (DTMF)  

GSM Data/Fax features:

• Data circuit asynchronous, transparent and non transparent up to 14,400 bits/s
• Automatic fax group 3 (Class 1 and Class 2)
• MNP2, V.42bis  

GPRS packet Data features:

• GPRS Class 10, PBCCH support Coding schemes: CS1 to CS4 Compliant with SMG31bis
• Embedded TCP/IP stack
• Short Messages Services features:
  - Text and PDU
  - Point to point (MT/MO)
• Cell Broadcast

GSM SUPPLEMENTARY SERVICES

• Call Forwarding
• Call Barring
• Multiparty
• Call Waiting and Call Hold
• Calling Line Identity
• Advice of Charge
• USSD
• Closed User Group
• Explicit Call Transfer  

OTHER FEATURES

• Advanced Open Software Platform: MUSE Platform Open AT
• Fixed Dialling Number
• SIM Toolkit Class 2
• SIM, network and service provider locks
• Real Time Clock
• Alarm management
• Software upgrade through Xmodem protocol
• UCS2 character set management  

INTERFACES

• RS-232 and audio through mini sub-D 15-pin connector supporting:
  - Serial link autoshutdown controlled by software (AT)
  - Baud rate
  - Autobauding  

AT commands interface:

• GSM 07.05 and 07.07 AT commands
• Comprehensive set of enhanced AT commands

   

Open AT APIs:

• numerous interfaces for embedded applications
• 2x GPIOs/I2C (multiplexed) + power supply through micro-FIT 4-pin connector
• SMA antenna connector
• Sliding SIM holder (3V SIM interface)