high gain wide band antenna 806-2500MHz directional panel antenna HK-8025-D15L65 fast delivery
Negotiable /Piece
Min.Order:2 Pieces
Shenzhen Shanhai Technology Ltd.
12dBi/15dBi broadband directional antenna(806-2500MHz) HK-8025-D15L65 fast delivery
60 degree 17.5 dBi 400W panel antenna(806-960MHz) HK-8090-D12L65 china supplier
16 dBi 806-960MHz directional antenna HK-8090-D16L65 wholesales
outdoor high gain 15db 806-960MHz directional antenna HK-8090-D15L65 hotsale
base station antenna 806-960MHz flat panel satellite antenna HK-8090-D12L65 made in china
high gain antenna 806-960MHz panel antenna HK-8090-D12L65 wholesales
Features:
1.High gain |
2.Work around the clock |
3.Optimization of sizes |
4.Dual-polarized |
Application: |
1.CDMA,GSM system |
2.Wireless communications and data transmission system |
HK-8025-D15L65 Electric Specifications | ||
Frequency rang(MHz) | 806-960 | 1710- 2500 |
Polarization | +-45 | |
Gain(dBi) | 13 | 15 |
Beamwidth | H:65 V:28 | H: 65 V:15 |
Front-to-back ratio(dB) | >=25 | >=25 |
Input Impedance(Ω) | 50 | |
VSWR | <=1.5 | <=1.5 |
Max power(W) | 400 | 200 |
Lightning protection | DC Ground | |
Mechanical Specifications | ||
Connector model | 2-N Female head 2-N Female | |
antenna size (mm) | 680*280*80 | |
Packing size(mm) | 700*320*170 | |
Antenna weight (kg) | 6 | |
Radome material | UPVC | |
Radome color | Gray | |
Mechanical tilt | 0~10(degree) | |
Working Temperatu | -40~60(degree) | |
Rated Wind Velocit(m/s) | 60 | |
Pole diamete(mm) | 50~75 |
Installation setup
1. put antenna upper and lower end sawtooth clip yards shàng of nut, and play pad and the flat pad twist xià, scored outside of Sawtooth clip yards, will antenna has joints of end towards xià, with sawtooth clip yards hold outside diameter for 50~75mm of hold Rod shàng, again put scored of Sawtooth clip yards through M8 of screw rod, put shàng flat pad, and play pad, then twist tight nut. |
2. remove the connector cover of the antenna and connect the antennaconnector and the sealed connector end of the antenna. |
3. loosen the connection between the two mounting bolts, suitably adjust thetilt angle of the antenna, and allows it to receive the signal for the best,and then tighten all nuts. |
Testing report、VSWR curve
Please use your mouse click on " send" bellow.We'll provide good service for you.