Product Details

gain 15 dBi upvc raw material communication antenna HK-AMXP-2327-D15L120 hot selling

communication antenna

Functions

What is the Features of directional pannel antenna?

Features:

1.High gain

2.Work around the clock

3.Optimization of sizes

4.Dual-polarized

Application:

1. 2.3/2.7 WLAN system

2.Wireless communications and data transmission system

3. WiFi System

4. 2.3/2.7 ISM Frequency Band

What is the Specifications of directional pannel antenna?

HK-AMXP-2327-D15L120 Electric Specifications
Frequency rang(MHz)	2300~2700
Polarization	Vertical
Gain(dBi)	15
Beamwidth(degree)	H:120 V:7
Front-to-back ratio(dB)	>=18
Input Impedance	50
VSWR	<=1.5
Sidelobe suppression for first sidelobe above horizon	15 dB
Max power(W)	200
Lightning protection	DC Ground
Mechanical Specifications
Connector model	2-N Female
antenna size (mm)	121011454
Packing size(mm)	1240125105
Antenna weight (kg)	6.5
Radome material	UPVC
Radome color	Gray
Mechanical tilt(degree)	0~10
Working Temperatu(degreec)	-40~60
Rated Wind Velocit(m/s)	60
Pole diamete(mm)	35~50

What is the Installation of directional pannel antenna?

Installation setup

1. put antenna upper and lower end sawtooth clip yards shàng of nut, and play pad and the flat pad twist xià, scored outside of Sawtooth clip yards, will antenna has joints of end towards xià, with sawtooth clip yards hold outside diameter for 50~75mm of hold Rod shàng, again put scored of Sawtooth clip yards through M8 of screw rod, put shàng flat pad, and play pad, then twist tight nut.

2. remove the connector cover of the antenna and connect the antennaconnector and the sealed connector end of the antenna.

3. loosen the connection between the two mounting bolts, suitably adjust thetilt angle of the antenna, and allows it to receive the signal for the best,and then tighten all nuts.