Ceramifiable polyolefin insulation compound for low voltage cable
USD $4.5 - $5.8 /Kilogram
Min.Order:1000 Kilograms
Jiangxi Longtai New Material Co., Ltd.
Ceramifiable polyolefin insulation compound for low voltage cable
Properties for Ceramifiable polyolefin insulation compound for low voltage cable
Typical | Typical | Typical | |||
Density | g/cm3 | --- | 1.54 | 1.54 | 1.55 |
Hardness | Shore A/D | --- | 92/40 | 94/42 | 94/40 |
Tensile Strength | ≥MPa | 6 | 8.65 | 7.5 | 8.65 |
Elongation at break | ≥% | 100 | 152 | 162 | 110 |
Thermal Aging | ℃xh |
| 100*240 | ||
Tensile Strength | ≥MPa | 6 | 9.5 | 7.3 | --- |
TS Change rate | ≤% | ±30 | +10 | -3 | --- |
Elongation at break | ≥% | 70 | 138 | 145 | --- |
EB Change rate | ≤% | ±30 | -10 | -11 | --- |
Volume Resistivity,at | ≥Ω·m | 1.0*1010 | 3.8*1014 | 3.7*1013 | 3.3*1013 |
Dielectric Strength | ≥Mv/m | 18 | 28 | 27 | 24 |
Impact Brittleness Temperature | ≤ |
| -45 | -45 | -45 |
15/30 | 0/30 | 0/30 | 0/30 | ||
Smoke Density |
|
| GB/T 8323 | ||
Flaming | ≤ | 100 | 60 | 55 | 44 |
Non flaming | ≤ | 250 | 144 | 160 | 108 |
Acidity of gases evolve | (PH)≥ | 4.3 | 6.5 | 6.2 | 6.3 |
Conductivity of gases evolved | ≤μs/mm | 10 | 1.0 | 0.5 | 0.5 |
Content of halogen acids | ≤mg/g | 5 | 0 | 0 | 0 |
Toxicity | ≤ | 2.5 | 0.3 | 0.2 | 0.6 |
environmental stress crack resistance | ≥96h | pass | pass | pass | pass |
thermal stress crack resistance | ≥96h | pass | pass | pass | pass |
Burn Properties | |||||
bending strength | ≥MPa | --- | 5.9 | 10.5 | 9.2 |
Volume Resistivity | ≥Ω·m | --- | ≥2.0*1018 | ≥2.0*1018 | ≥2.0*1018 |
Dielectric Strength | ≥Mv/m | --- | ≥40 | ≥40 | ≥40 |
ceramic retention | ≥% | --- | 80.2 | 84 | 85 |
Description for Ceramifiable polyolefin insulation compound for low voltage cable
Ceramifiable, Flame retardant and Fire retardant POE compound for low voltage cable is based on POE resin, produced and pelletized by special technology with adding special modifier, flame retardant, anti-oxidant and other special additives.