Note: The timber should be adopted prior woodworking band saw, circular saw and other processing equipment to length more than 40cm wide 8cm, 1.4cm thick blank, can be put into the 1st unit, the 2nd and other water processing products.

Remark:

1.Normally the size of the chopsticks is length 19-24cm.width 1.2—1.3cm,thickness 0.4—0.5cm

2.Above 6 sets of wooden chopsticks machine is production line,Chopsticks heaging machine is for the picture (2)according to customer’s demands to buy.

3.Output: 40000pairs/8hours, need 3-4 workers.

4.If customer add another 2 more sets Chopsticks forming machine,the capacity is 120000 pairs/8hours.

5.Normally per cube meter timber can produce 50000pairs chopsticks for length 190mm.

6.Engery consumation:10℃/h,can contunue work for 12hours.

7.Usually this machine need 380v/50HZ,3 phases voltage in china.

If the voltage in your country is 220v/3 phases,then you can use a transformer to change the voltage.And we also can custom the voltage into 220v/3 phases.

1. Which kind of Henan Gelgoog Company?

 -- Henan Gelgoog Commercial & Trading Co.,LTD,has twenty years experience of the industry development .We have well-experienced managers. Outstanding engineers as well as well trained technical workers . By constant technical exchange with well wellknown firms of the same line in the world and also by introduction of advanced techniques and experiences into our company ,we have extablished a strong technical guarantee system . 

-- We normally make voltage into 220V/50HZ/Single phase or 380V/50HZ/Three Phase.But it can be made accourding to clients'  demand, like 110V/60HZ/Three phase.

3. What kind of packing box is?

-- we pack machines in a standard exporting plywood case, no vermin,germs.

      help get better protection while transporting.

 4. How long is the guarantee?

-- we promise guarantee as one year for non-human damage factor.

5. How should I do if meet some trouble while using?

-- don't worry about that. we are always be pleased to provide using support to

    clients. we can take a video for showing how to resolve the problem. and write

    detail resolution to you.

6. What's the payment mode?

--T/T,L/C,Western Union or MoneyGram.

Act as a good adviser and assistant of clients enable them to get rich and generous returns on their investments. 

 1>. Select equipment model; 

 2>. Design and manufacture products according to clients' special requirement;

 3>. Train technical personnel for clients. 

2. Services during the sale:

1>. Pre-check and accept products ahead of delivery;

2>. Help clients to draft solving plans.

3. After-sale services:

 Provide considerate services to minimize clients' worries.

 1>. Assist clients to prepare for the first construction scheme;

 2>. Install and debug the equipment;

 3>. Train the first-line operators;

 4>. Examine the equipment;

 5>. Take initiative to eliminate the troubles rapidly;

 6>. Provide perfect service;

 7>. Provide technical exchanging