hydraulic plant stalk packing machine/baler machine
USD $1 - $6,000 /Set
Min.Order:1 Set
Zhecheng Hong Xin Machinery Factory
hydraulic corn straw beler/packing/bagging/wrapping machine
For the series of hydraulic balers; straw, grass, waste paper, cotton, clothing, plastic, wool, recycled paper boxes, paper board, and other soft materials can be compressed package, greatly reducing the volume, increase density, to facilitate transportation and storage.
The main structure; including stents, stent with a floor and front and rear side of the baffle, bracket installed jack, jack with a piston rod, piston rod connected to the vertical right pusher plate, push the right side plate is connected to push plate Article pusher strip adjacent to the board through the gap between the groove; stand above on the right side of the bezel with a binder, binder stand on the top left side of the bezel with a feed inlet; around the side of the block Plates were fixed on the right side of the bracket around the side of the block section is connected to the adjacent side of the gap between the block section rope to wear mouth; stand right with a gate, a gate hinged at the right end of a door frame, door left Connected to the side door bar, the gap between the adjacent door section to the door wearing a groove; around the side of the bezel, push the plate and the bottom of the cavity enclosed chamber for the feed, before and after the side of the block section, the pressure on the block material Panels, door panels and floor cavity surrounded by material for the extrusion cavity; door and the frame locking device is connected to right fixed. Needed in a certain range can be adjusted within the package the size of the model is complete, the price is reasonable
Model | HXDB-1000 |
Pressure | 10 T |
Baler box Dimension | 800*400*600 mm |
Power | 7.5 KW, 24 HP |
Bundle weight | 40-50 kg |
Work efficiency | 10-13 balers/h |
Oil cylinder | Φ125*1 |
Oil cylinder distance | 1 m |
Machine dimension | 2200*700*3300 mm |
Machine weight | 1000 kg |