Specifications

1.clay brick press
2.11 KW motor
3. 8000-10000 capacity
4. Produce hollow bricks
5. ISO SGS

HX series low investment clay block production machine, clay brick press

Brief introduction of automatic clay brick press

 

The automatic clay brick press uses raw materials such as shale, clay, gangue, coal ash etc to produce various hollow bricks. Compared with common bricks the hollow bricks have the advantages of light weight, good heat preservation and sound insulation. So it has become the main material in construction industry. The automatic clay brick press of our company is fabricated with steel plates, has compact structure and high efficiency.

 

Production process of hollow bricks:

 

Clay-----Box feeder-----Roller crusher-----Double shaft mixer----- Automatic clay brick press ----Brick cutting machine-----Cut billet machine -----Drying-----Sintering

 

Main features of automatic clay brick press

 

1.Low-cost shale, clay, gangue, coal ash as raw materials, low energy consumption.

2.Various hollow brick shapes can be produced by changing moulds.

3.Scientific structure design, convenient installation and maintenance.

4.Compact structure, stable running, investment-saving level: 35%

5.Reduce energy consumption by 30%, increase output by 20%

6.Automatic clay brick press adopts quenching technology, redactor gear adopts hardened gears to extend service life

 

Application of automatic clay brick press

 

1.Suitable for producing all kinds of hollow bricks

2.Widely used in hollow brick making factories.

 

Warm tips when operating the automatic clay brick press

 

1.Adjust the position of core mark in core pin to balance the material feeding speed.

2. The material should be soft when test operation. When clay strips have good shape then gradually adjust the moisture content to make clay strips have appropriate hardness.

3.If clay material could not be extruded the clay brick machine should be checked and maintained.

4.Regularly check clay strip quality to avoid hole deviation and bottom deformation.