Product Details

Specifications

coal/charcoal bar making extruder machine
1. high production
2. high automatic
3. shape, length, diameter can be adjusted

coal/charcoal bar making extruder machine 0086-15238010724

1. Coal and charcoal extruder machine is to use the principle of screw extrusion, the modulation has a good strength of coal compressed into the shape of the coal target rod molding equipment.Coal extruder hardened rod reducer, small size, high load capacity.

2. Coal extruder rod with thick blades inside the impeller design, impeller and cylinder liner with wear-resistant casting material body made of material than the average life expectancy increased 4-5 times;

3. machine head of the coal export bar with replaceable wear-resistant alloy steel production, easy to change.Head and the cylinder by splicing form of maintenance may open, replace the impeller and the cylinder liner inside easily.

4. Coal extruder machine is the aerospace plant after years of research, but also a new product.TF briquette rod extruder is ammonia fertilizer plant, gas plant fuel gas system formed Section of complete sets of equipment in a main equipment, which is the pulverized fuel intensity squeezed into a certain circle (or 6 prismor square) coal stick into the combustion gas furnace new technology to replace gas burning lump coal and briquettes brand of traditional working of coal bar machine arts space.

5. Use of coal bar machine can make full use of pulverized coal-stick, in the production process does not require adding lime to reduce the fuel costs, and improve the calorific value of coal, and the higher cost, other devices are small, notcarbonization drying equipment required, no steam, reduce investment, reduce the area.At the same time the effective use of low-cost coal producers, coal instead of expensive, thus reducing production costs, improve economic efficiency, provide reliable protection.

model		HXII-140	HXII-180	HXII-220
Capacity	Charcoal	400-600 kg/h	800-1200 kg/h	1200-2000 kg/h
Capacity	Coal	1000-2000 kg/h	2000-3000 kg/h	4000-6000 kg/h
Diameter		20-40 mm	20-60 mm	50-120 mm
motor		11 kw	18.5 kw	55 kw
Weight		1200 kg	2500 kg	5000 kg

famous sawdust/biomass briquette making machine 0086-15238010724

1.introduction of the machine

Briquettes are made by grinding Biomass and sawdust into a homogeneous pulp and forming this into a briquette under very high pressure. High pressure & pressing releases one of the natural components of wood - lignin which has the property of becoming liquid at high pressure (temperature) and, as it subsequently cools, it binds the wood together in its new form Briquettes.

After the processing of drying, compressing under the high pressure and temperature, the biomass briquette is characterized by high density, small in size, better combustion, capable as the substitute for the superior coal or firewood. This bio-fuel briquette is 45-80mm in diameter, occurs in the hollow quadrangular or hexagonal cylinder or hollow hexagonal with a 15-20mm hole through the body. The bio-fuel carbon maintains the cleanliness and hygiene, and is suitable for family heating and barbecuing.