t bar suspended ceiling grid

 

Picture of recyclable t bar ceiling tiles

 

Advantage of recyclable t bar ceiling tiles

 

1. High grade galvanized steel as main material, non-deforming, fadeless, moisture proof and anti-corrosive.

2. Strong close fitting, high symmetry

3. High load capacity

4. Easy and fast installation, save installing time and labor cost

5. Large production line and strict product inspection, larger quantity and better quality are available

6.Convenience in installation,it shortens working time and labour fees.

7.Neither air nor environment pollution while installing.With good effect for space dividing and beautifying.

8.Re-cycled Material which is meet the environment protection policy in the world.Using fire proof material to assure living safety.

9.Can be installed according to practical demands.

10.The physical coeffcients of all kinds frames are ready for customer and designers’reference and request.

 

SPECIFICATIONS:1

 recyclable t bar ceiling tiles

SPECIFICATIONS:2                                                                                                                                         

 (a) 32H:

Main Tee	24 x 32 x 3.6m, or  3.0m, 3.05m, 3.66m
Cross Tee	24 x 26 x 1.2m, or 1.22m
Small Tee	24 x 26 x  0.6m, or 0.61m
Wall Angle	22 x 22 x  3.0m, 24 x 24 x 3.0m
Thickness	0.23mm, 0.26mm, 0.29mm, to 0.30mm and 0.40mm

 

 

 

(b) 38H:

Main Tee	24 x 38 x 3.6m, or 3.0m, 3.05m, 3.66m
Cross Tee	24 x 26 x 1.2m, or 1.22m
Small Tee	24 x 26 x 0.6m, or 0.61m
Wall Angle	22 x 22x 3.0m, 24 x 24 x 3.0m
Thickness	0.23mm, 0.26mm, 0.29mm, to 0.30mm and 0.40mm

INSTALL                                                                                                                                                                 

 

1.The frame is the light style.It is hung according to strict requirements.Then put the sound absorption board on the frame.

 2.Hang the frame with H light Ceiling Grids.Insert the board into the frame.

 3.Hang the frame with T Ceiling Grids,put the non groovy part on the frame.The groovy part needs the Ceiling Grid.

4.Set the plasterboard on the Ceiling Grids.There are 15 plasting points which will be put with the lines and set with nails.

 

Widely be used for fixing Mineral Fiber Ceiling Board and PVC Gypsum Ceiling Board,etc

We can also supply t grids with black line and groove in the middle for beautiful effect.