Geotextile Sand Bag For River Training
USD $0.4 - $1 /Ton
Min.Order:2 Tons
Sichuan Groupeve Co., Ltd. ( Imp. & Exp.)
DESCRIPTION
Groupeve Woven Geotextiles are made from high-modulus yarns woven together, featuring dimensionally stable geotextiles. They are resistant to ultraviolet (UV) degradation and to biological and chemical environments normally found in soils.
Groupeve Woven Geotextiles have a remarkable capacity for filtering soils, distributing loads, reducing rutting and extending the life of paved and unpaved roadways because of its high tensile strengths and low elongations, high modulus. Woven Geotextiles are available in varying tensile strengths and hydraulic properties to suit particular project demands.
All of our woven geotextiles have especially capacities in separation, reinforcement, filtration, drainage(Geotube) and cushion applications.
Made from 100% UV stabilized strong woven geotextiles, Geotubes provide a simple, low maintenance and cost effective solution for the drainage by filling sludge into Geotubes and dewatering from sludge.
PROPERTY
Performance: High strength, Low deformation, Low elongation.
Durability: Steady property, Not easy to resolved, Air slaked and Can keep the original
property long term.
Anti-erosion: Anti-acid, Anti-alkali, Resists insects and Mould.
Permeability: Could control the sieve size to retain certain permeability.
FEATURE
Material: Polyester(PET), Polypropylene(PP)
Color: White
Maximum Width: 5m
Weight: 100gsm-2000gsm
Tensile Strength: 50KN/M-800KN/M
TYPICAL APPLICATION
1. Reinforced
Used in highway, railway, airport, dam, embankment slope, retaining wall backfill soil and rock engineering, such as edge vicious dispersive soil stress increase soil modulus and limit soil slip, improve stability.
2. Protection
Prevent the bank from wind, wave, tide and rain erosion, and used for bank protection, slope protection, bottom protection, prevent water loss and soil erosion.
3. Filter function
Used in dam, the river and coast stone fast, slope, retaining wall filter layer, prevent sand grains, and allow the water or free air to pass through.
PRODUCT STANDARD
Test Method: GB/T 17689~2008
DATA SHEET
Properties | Unit | GE140 | GE200 | GE260 | GE320 | GE390 | GE460 | GE530 | GE600 | GE680 | GE760 | GE950 | |
Mechanical Properties | |||||||||||||
Tensile Strength | MD | KN/m | 35.0 | 50.0 | 65.0 | 80.0 | 100.0 | 120.0 | 140.0 | 160.0 | 180.0 | 200.0 | 250.0 |
TD | KN/m | 0.7~1.0 of the MD Tensile Strength | |||||||||||
Tear Strength | MD | KN≥ | 0.50 | 0.80 | 1.10 | 1.30 | 1.50 | 1.70 | 1.90 | 2.10 | 2.30 | 2.50 | 3.00 |
TD | KN≥ | 0.50 | 0.80 | 1.10 | 1.30 | 1.50 | 1.70 | 1.90 | 2.10 | 2.30 | 2.50 | 3.00 | |
CBR Plunger Strength | KN≥ | 2.0 | 4.0 | 6.0 | 8.0 | 10.5 | 13.0 | 15.5 | 18.0 | 20.5 | 23.0 | 28.0 | |
Elongation at Yield | MD | % | 35 | ||||||||||
TD | % | 30 | |||||||||||
Hole Size | O90 (O95) | mm | 0.07~0.5 | ||||||||||
Vertical Permeability | cm/s | k*(10-2~10-5),k=1.0~9.9 | |||||||||||
UV Resistance (% strength retained after 500 hrs) | 70% | ||||||||||||
Identification Properties | |||||||||||||
Material | / | Polyester or Polypropylene | |||||||||||
Color | / | White | |||||||||||
Weight unit area | g/m² | 140 | 200 | 260 | 320 | 390 | 460 | 530 | 600 | 680 | 760 | 950 | |
Forms of Supply | |||||||||||||
Roll width | m | 4.4 | |||||||||||
Roll length | m | 100 |