Feature

Look no further. Great product quality, that's solidly built.
Best of all, its very affordable price. Buy today.

Item Description

Can measure current, voltage, power.
1 Accuracy: 1% plus or minus two bytes
2 Display: voltage, current, power display
3 Measurement range: AC Voltage: AC 80-300V
4 AC current: AC 0-100.0A, when measuring current is less than 10A, current display resolution is 0.01A; when the current is more than 10A, current resolution is 0.1A, measuring range automatically convert (decimal point automatically shift)
5 Active power: ( measuring voltage AC 80-300V) 5-30000W, normally display starts with 3W measuring power!
6 Apparent power: ( measuring voltage AC 80-300V) 5-30000W, normally display starts with 3W measuring power! Power Factor: 1.000-0.000
7 Measurement speed: about 2 times per second
8 Dimensions: 54 (L) 80 (W / H) 64 (D) mm
9 Installation width: = 3P (DZ47 / C45, air switch position)
10 Meter protruding part size: 54 (L) 45 (W / H) 16 (D) mm
11 Installation way: din-rail (market universal din-rail) Note: din-rail not included
12 Built-in mutual inductor: the wire to measure circuit through the right round hole of the meter (11MM round hole diameter can pass through ma. 12 square (mm) standard copper wire / can meet ma. load current 100A) Note: The load is through the meter round hole from above or below, do not affect the current measurement accuracy.
13 Eternal mutual inductor (hole diameter 15.5mm) can meet national standard 21-25 square (mm) standard copper wire to pass through.
14 This meter is only suitable for pure AC 50-60HZ electric supply, not for measuring square wave, converter output and modified sine wave circuit, otherwise the instrument will be permanently damaged!
Usage and wiring methods
1 measured voltage accesses to the terminal 1 and 2 on the lower left of the instrument
2 eternal mutual inductor wiring according to diagram in FigureI, the two wires of precision current mutual inductor are connected respectively to the 3 and 4 terminal on the upper left side; the wire to measure circuit through the mutual inductor round hole. (mutual inductor lead can be etended to ideal installation place by yourself in accordance with your equipment) etended length of 0.5-3 meters.
3 built-in mutual inductor wiring according to diagram in FigureII, the wire to measure circuit through the right round hole of the meter, users choose the direction they needed, can pass from bottom round hole upwards, or pass from upper round hole downwards, different directions do not affect measuring result.
4. after connected to power supply, the meter displays the measured values, sequential display of power measurement is: display active power (W) after power on, press the left button on the instrument panel (SAM CK), display apparent power (VA), press the button again to display power factor (cos)

Package Content

1 Ammeter voltmeter power meter
1 English user manual
Packaged in carton