Multifunction cavitaion rf cyrolipolysis  sliiming machine

1).  Working Theory

Triglyceride in fats will be converted into solid in particular low temperatures.
 

It uses advanced cooling technology to selectively target fat bulges and eliminate fat cells through a gradual process that does not harm the surrounding tissues, reduce unwanted fat, when fat cells are exposed to precise cooling, they trigger a process of natural removal that gradually reduces the thickness of the fat layer. And the fat cells in the treated area are gently eliminated through the body’s normal metabolism process, to eliminate unwanted fat. 

2)Cryolipolysis Procedure

The cryolipolysis procedure involves the use of an applicator that cools the fat cells in the targeted area of your body for a simple, natural fat removal process. An applicator cup is then attached to deliver a gentle vacuum pressure that draws tissue between the cooling panels

The treated fat cells are removed though natural metabolic processes within the body, similar to the way fat from food is removed. This allows for a gradual reduction in fat from targeted areas to create a slimmer, more defined appearance. The Cryolipolysis procedure usually takes two or more hours to perform, depending on the size of the area being treated

3)Cryolipolysis Process:

1.Test the heart rate of the people who is receiving the treatment, whether it is normal[50-100],
2.Check the thickness of the fat
3.Clean treatment area ,Clear the hair of the treatment area
4.Mark the size of treatment area
5.Use antifreeze on the treatment area
6.Paste antifreeze membrane at treatment part.
7. Patients receiving the treatment should be sitting Make upper body and lower limbs to 90 degrees.
8.Choose the program according to thickness of fat.[P1, P2, E]
9.Start the machine. [start button]
10.Make the cooling device to suck the treatment area gently, press the control button in the handle once, and set the vacuum suction intensity.
11.When the suction strength is suitable, press the control button in the handle again, to keep the constant suction. Adjust the suction appropriately to make it acceptable for the user.
12.Timing of treatment
13.25-30 minutes after treatment, press the control button in the handle, to stop the suction.And check and add antifreeze.
14.Repeat steps 10 to 11 until the treatment course finished[press the start button the again] and turn off the power

35-45khz cavitation handle

1. Results are visible after the first treatment (1-4 cm)
2. Belly, hips, thighs, buttocks, knees, and upper arm shaping without surgery and scars.
3. Non-invasive, painless, safe, and quick alternative to liposuction.
4. Precise removal of sectional fat layers without long term recovery.

  Multipolar RF handle

1. The heat  produced in the tissue by the passage of the   5mhz RF is an excellent alternative to obtain non invasive reaffirmation of flabby and aged skin.
2. The controlled heating generated at this frequency reaches a superficial cuteanous temperature between 38-42C,capable of stimulating the existing dermic collagen and producing a transition process in the denominated collagen contraction.
3. These reactions are use  to give more firmness and quality  to the skin.The result is a smoother skin and an evident reduction of wrinkles and flaccidity , as well as the "orange skin" very characteristic of the cellulite.

Technical Parameters
1.Host display: 8 "TFT color touch screen
2.Voltage : 220V/50Hz or 110V/50Hz ( according to the mark on the machine )
3.Power: ≤ 500w
4.Cooling liquid: pure water
5.Vacuum: 650mmHg
6.Pump flow rate: 60L/min
7.Vacuum pressure: 0-106Kpa
8.Freezing temperature: 0°C, -10°C, -15°C
9.Fat exploding frequency: 35-40K