Liposonic higu working principle

 Liposonix working principle

The liposonix system uses highintensity focused ultrasound energy penetrate

 through the skin layers and into the targeted fat tissues without harming skin 

or surrounding tissues, deep subcutaneous 1.3cm for treatment, can destroy 

the subcutaneous fat permanently, reduce fat at the same time, to stimulate

 collagen contraction and regrowth of subcutaneous tissues layer, make the

 treatment area more smooth and tighten.

Liposonic hifu Application

The treatment area can pinched one inch or 2.5cm of fat tissue can be treated:

Abdomen

The side of the waist 

Buttocks

Both sides of thigh

Liposonic Specification

HIFU technology of portable body hifu machine:

Use high energy ultrasound focusing the treatment position, so that the skin tissue create the thermal, and make high-speed friction cells to stimulate collagen. Such heat effect will not hurt the epidermis, because the treatment fast and direct access to the treatment site within 0-0.5 seconds, without touching the surrounding tissue and can be passed directly to the superficial tendon membrane system (SMAS), so it can be done firm skin while pulling the muscle layer, thin face up to the progressive effect.

HIFU principle:

HIFU is Unlike lasers, radio frequency, surgery and other technologies, it is a non-surgical  bypasses the surface of the skin to deliver the right amount of ultrasound energy at the right depths and the right temperature.

High Intensity Focused Ultrasound also known as‘HIFU-Knife’ into the deep skin layer, in order to gently heat the tissue to lift and tighten aged skin without any incisions or disrupting skin surface.

Using HIFU technology, device is able to transfer the heat energy into 3 to 4.5 mm under the surface of the skin ( SMAS) precisely.

The HIFU will heat the SMAS up to 60℃ to 70℃,This heat energy raises thermal coagulation point which accelerates skin rejuvenation process and maximizes tightening effect of the skin layer.

Liposonic hifu Q & A 

Q1: How does the Lipohifu treatment work to destroy fat?
A1: The Lipohifu system focuses high-intensity focused ultrasound energy at a precise depth (1.3 cm) within the targeted adipose tissue in the abdomen and flanks, without harming the skin or surrounding tissues and organs. This causes thermal coagulation of adipose tissue within the focal zone of the ultrasound beam. The destroyed tissue and released triglycerides are engulfed and removed by macrophages that are drawn to the treated area by chemotactic signals. The lipid-laden macrophages then move through the lymphatic system to the liver, where the lipids are processed by the body normal biochemical pathways. Once processed by the liver, the energy from the lipids may be used by the body directly or, as with any fat, may be stored by the body in adipose tissue if the energy is not required immediately. Adipocytes that are destroyed in the treated area are no longer available to store fat. The damaged tissue in the treated area is resorbed over a period of approximately 8 to 12 weeks, which can yield an aesthetic body-contouring effect.
Q2: Is the treated fat permanently removed?
A2: The Lipohifu treatment destroys targeted fat in the treatment areas of the abdomen and flanks. The adipocytes that are destroyed in the treated areas are no longer available to store fat, and are removed over a period of 8 to 12 weeks through the body's natural healing process.
Q3: What does a Lipohifu treatment feel like?
A3: During treatment as recommended, patients may experience discomfort, cold, prickling, tingling, or warmth. The most common post-treatment side effects include discomfort (pain), ecchymosis, erythema, and edema, which are generally described (or rated) as mild. Pain management is at the discretion of the physician. In clinical studies, subjects have described different levels of discomfort depending on the treatment area, fluence level selected and the number of sites treated.
Q4: What body parts can be treated?
A4: Abdomen, flanks, hips, thighs and buttocks.
When will patients see the full result of treatment?
Results are typically seen in 8 to 12 weeks after treatment. This is the time it takes for the body to naturally process the destroyed fat tissue.
Q5: Why is using purified water and maintaining contact of the treatment head to the skin important?
A5: In order for the ultrasound energy to be transmitted into the body there can be no air or gas in the treatment path. Any air in the ultrasound beam will result in a reflection of the ultrasound energy back towards the transducer. Water applied to the skin acts to remove the air between the treatment head and the patient skin, allowing for transmission of the ultrasound energy into the body.

1. 1 year warranty for mainframe, and lifetime maintenance freely,within 1 year, we will be responsible for the repair if equipment is with small problem,we can delivery the part to you,you fix it according to our install instructions.

2.Within one month, if the machine is of any big fails, we will send you a new machine.

3. For your consultation, we offer on-line service. Our sales team and technical service team will answer you within 12 hours

4.Offer OEM ODM Service: We have more professional product designers, more More rigorous production line

Q:What’s your after-sales service and warranty?

1.24 months warranty from the first day of receiving goods;

2.Within one month, if the machine is of any big fails, we will send you a new machine.

3.Within 2 year, we will be responsible for the repair if equipment is with small problem,we can delivery the part to you,you fix it according to our install instructions. 

Q:Do you accept ODM&OEM orders?

A: Yes, we provide ODM&OEM services to worldwide customers

Q:What’s the MOQ?

A: MOQ is 1 set; for customized products MOQ should be negotiated in advance.

Q:How long is the lead time?

A: The lead time for one set is 3-7 days,

Q:How to place orders?

1. Email us the model, brand and quantity, consignee information, shipping way and payment terms; 

2. Proforma Invoice made and sent to you; 

3. Complete Payment after confirming the PI; 

4. Confirm Payment and arrange production.