Face Lifting Best Selling Products In America Stretch Mark Removal Laser Equipment Co2 Fractional For Scar Removal
USD $1,000 - $6,000 /Set
Min.Order:1 Set
Weifang Tensa Laser Technology Co., Ltd.
Technology of Ultrapulse
Mainly let the original average output of the laser energy concentrated in a very short period of time then output, due to the high pulse power, short time, and more round spot, the pressure on the surface from laser heat transfer effects is low (small heat-affected zone).
10600nm RF drive Fractional co2 Laser Scars Removal & Vaginal rejuvenation | |
Laser’s wavelength | 10600nm |
Machine power | 30W-80W |
Wavelength of the target | 635 nm |
Power of Target optical | ≤ 5mw |
Diameter of Focal spot | 0.25mm |
Area of Focal spot | 0.05mm2 |
Output Power | ≤30W (optional) |
Operating voltage | AC 220V ± 10%, 50Hz |
Graphic area | ≤ 20mm × 20mm |
Mode of Spot | single-mode |
Operation | Intermittent and continuous work |
Scan mode | switching: order, disorder, parallel |
Refrigeration system | Air-cooled and water |
Optical system | 7 articulated arms |
Output mode | Super-pulse dot-matrix |
Output graphic | triangle / square / rectangle / circle/ Oval / hexagon / linear (scalable) |
Net weight | 68Kg |
Gross weight | 77kg |
Fractional CO2 laser therapy works mainly on the principle of fractional heat damage. The fractional CO2 laser creates microscopic holes in the upper layer of skin and leaves the deeper part of the skin intact.
The purpose of the treatment is to create controlled heat damage at the basal layer of skin leading to the reduction of wrinkles, pigmentation and acne scarring. The fractional CO2 laser also tightens and refines the skin as well as improving the long term collagen and elastin reproductio
1. 10600nm co2 rf tube laser,
2. various wrinkles,
3. Shrink pores
4. Remove stretch marks
CO2 laser system
The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.
The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.
5. Skin tightening and loosen (Deep Wrinkles and Shallow wrinkles)
6. Remove freckles and pouch
7. Actinic keratosis
8. Basal cell carcinoma Burn debridement
6 different scanning shapes
Theory - co2 fractional laser
Inside package with full foam shape,outside package is strong ABS aluminum.
1.We have two year warranty, and lifetime maintenance.
2.Within one month, if the machine is of any big fails, we will send you a new machine.
3.Within 2 year, we will be responsible for the repair if equipment is with small problem,we can delivery the part to you,you fix it according to our install instructions.
4. After two years, we also repair the machine, but you need to pay the cost of the changed parts.
5. For your consultation, we offer on-line service.
6.Offer OEM ODM Service
Q:What’s your after-sales service and warranty?
1.24 months warranty from the first day of receiving goods;
2.Within one month, if the machine is of any big fails, we will send you a new machine.
3.Within 2 year, we will be responsible for the repair if equipment is with small problem,we can delivery the part to you,you fix it according to our install instructions.
Q:Do you accept ODM&OEM orders?
A: Yes, we provide ODM&OEM services to worldwide customers
Q:What’s the MOQ?
A: MOQ is 1 set; for customized products MOQ should be negotiated in advance.
Q:How long is the lead time?
A: The lead time for one set is 3-7 days,
Q:How to place orders?
1. Email us the model, brand and quantity, consignee information, shipping way and payment terms;
2. Proforma Invoice made and sent to you;
3. Complete Payment after confirming the PI;
4. Confirm Payment and arrange production.
Send your inquiry details in the below to click “send” now for free sample.
The faster action, the more discount!
Application:
1. Application Range of Fractional treatment handpiece
a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
c. Reconstruction of photoaging skin.
2. Application Range of Incision Handpiece
a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc