CE Approved Ipl Laser Machine Diode Laser 2000W Hair Removal Shr Bikini / Armpit Hair Removal
USD $7,000 - $9,000 /Piece
Min.Order:1 Piece
KLSI (Beijing) International Technology Co., Ltd.
Treatment characteristics
1.Terminator 808 + combines the benefits of all 3 wavelengths, It is groundbreaking for the laser hair removal industry.
2. combined wavelengths covering the optimal treatment spectrum 808nm 755nm 1064nm, the treatment Characteristics for different hair
3.Virtually painless
4.All skin types, even tanned skin
CE approved ipl laser machine diode laser hair removal shr
Advantage of diode laser hair removal machine:
1).Our diode laser bar is imported from Germany, good quality and life can be 10,000,000 shoots,handle piece can be use at least five to eight years.
2).The screen has three working treatment mode, HR,SR,SHR, all treatment can be done in
one machine.
3).Technology Leadership--We use the most advanced microchannel cooling technology, which is eco & environmental
protection technology instead of Compressor refrigeration technology that most of diode hair removal machines used ,which caused environmental pollution by cooling agent.
4).Longest lifetime--up to 20 million pulses guaranty (handpiece), which can be used for at least 4100 person's armpit hair removal treatment .Most of other diode laser machines in the market only ensure 3-5million pulses.
5).With mono-sapphire crystal on the treatment head ,the best to keep energy output
stable and can be used forever without replacement.
6).Fast treatment--With big spot size :12mm*12mm make faster and more efficient
treatment, only 5-8 minutes for armpit hair removal, 1 hour or more(accordingly ) for
whole body hair removal ,painless and quick recovery without any influence on patients’daily work.
7).Sapphire contact cooling system—the chill tip cooling handpiece temperature at 4°C to make sure you feel Painless and comfortable during the whole treatment.
Basic Specification of laser hair removal machine :
Item | Specification |
Light sources | Diode (continuous wave) |
Laser wavelength | 808nm |
Laser Type | German Diode Arrays |
Modes | SHR mode/HR mode/SR mode |
Spot size | 12mm*12mm |
Fluency | Up to 120J/cm 2 (HR mode); Up to 25J/cm 2 (SHR mode) |
Pulse width | 10~400ms |
Repetition rate | Up to 10Hz |
Power | 500 W (300W,400W,600W Option) |
Cooling | Aggressive Sapphire contact cooling |
Display | 10.4" True Color LCD Touch Screen |
Rated input power | AC230V±10%,15A ±60/50Hz/AC110V 10%,60Hz;(Optional) |
Electrical | 110/220V 15A max 50/60Hz |
Physical dimension | 450mm×450mm×1240mm |
Advantages
1.Cost-effective;
2.Convenient for transportation;
3.1200W laser power, it is more effective and less treat seesions needed;
4.Micro channel for cooling system, it is more comfortabal and safe during treatment;
5.While the machine can also work 8 hours continuous;
6.6mm tip for localized area hair removal.
High Energy Output: Make sure good effective for any coloring matter -----------------120J
Long Pulse Width: Make sure heating hair follicle, lasting hair removal------------------10~400ms
Big Spot Size: Fast and Effective Results ------------------------------------------------------12*12mm
Strong Cooling: Instance cooling skin, safe and comfortable ------------------------------5℃
Fast Speed:Slide treatment to make it safety and convenience---------------------------10HZ
Main feature of laser hair removal:
1).Manufactured with the best German diode bar and our unique diode package
technology.
2).Biggest and effective spot size 12*12mm, combined SHR, Only 5~7 minutes for
armpit hair removal, 1 hour for whole body only.
3).Advanced spare parts :
-Germany Dilas laser bar arrays
-Germany radiator fan;
- Italy water pump;
- US heat-exchanger;
- US Filters;
4).Treatment handle using sapphire optical crystal as light guide, never worn, life-long use without replacement.
5).Micro channel cooling technology,which is eco & environmental protection
technology instead of Compressor refrigeration technology.
6).Self-checking and auto-protection mechanism to ensure the stability
7).The squared big spot size can prompt the treatment speed.
8).More than 20, 000, 000 shots (within one year ) ensure longer lifetime than other
hair removal machine
9).Strong cooling capacity and water management,enable our handpiece keep shoting 10 hours continuously110). CE, FDA,ISO being approved.
Working Principle of laser hair removal machine:
Diode laser equipment adopts 808 nm, particularly effective to hair follicle melanocytes
without injury surrounding tissue. The laser light can be absorbed by hair shaft and hair follicles in the melanin, and converted into heat, thus increasing the hair follicle
temperature.It use Dual Pulses Technology increase safety,which is that it uses first pulse to
pre-heaten hair follicle and tissues around to 40℃, uses the second pulse to destroy dermal papilla cells,and then prevent hair regeneration.When the temperature raises high enough to irreversibly damage the hair follicle structure, which disappear after a period ofnatural physiological processes of hair follicles and thus achieve the purpose of permanent hair removal.
Applications of laser hair removal machine:
HR / FHR (Traditional hair removal mode energy)
Hairline, Cheek, Lip, Beard, Bikini
1. Widely used for any color hair.
2. Widely used for any skin type.
3.Removel area: Lip hair, beard, chest hair, armpit hair, back hair, arm hair, leg hair, unwanted
hair outside the bikini line.
4. Skin rejuvenation
System Characteristics of laser hair removal:
1). No pigmentation, used for any skin type.
Terminator hair removal system uses penetrate technology and skin absorbs fewer
lasers and no pigmentation.
2).Sapphire touch cooling system can make sure that treatment more safe and no hurt to skin.
Sapphire touch cooling system of hair removal system can make sure that doctor use
the maxi energy and can not hurt skin. This kind of cooling system can make sure that
no hurt to skin when patients are given more pressure. As reported, the pressure can
increase 30%-40% light.
3). The big spot size can prompt the treatment speed.
Terminator use 12*12mm big spot size. It makes sure that when do large area hair
removal and prompt treatment speed and efficiency. Because of big spot size, it can
escape from repeated treatment for hair area.
Treatment steps of laser hair removal machine :
1. Clean skin
2. Shave hair(Leave short hair about 1mm)
3. Remove remained hair on skin
4. Lay gel on skin(Suggest to use natural gel without alchol and colour element
gel thickness should be about 0.3cm-0.5cm)
5. Parameter adjust(Please refer to manual book or treatment part of video)
6. Treatment
7. Clean skin after treatment with water
8. Water replenishing with doctor laser bfgf
Shapping of laser hair removal machine:
Packaging :
Delivery :
Shipping Way :DHL,UPS,TNT,Fedex etc express courier door to door service and by aircargo to some airport of your country
Warranty:
Features & Advantages of 808 diode laser
1) High energy, no pigmentation, excellent treatment result can be expected at the first treatment and suitable to all types of hair .
2) Long laser width, Effective for the hair follicles produce heat accumulation, Permanent hair removal.
3) Safety, Almost no skin scattering, no harm to the skin and sweat glands, no scar, no any side-effect
4) Skin-Touching cooling system can make momentary epidermal anesthesia, no any painless during, increases comfort during treatment .
5) Best thermostatic water cycle system guarantee semiconductor pump can't burn cavities due to overheating.
6) Self-checking and auto-protection mechanism to ensure the stability .
7) Strong Sapphire touch cooling system can make momentary epidermal anesthesia, no any painless during, increases comfort during treatment.
8) Quick: Squared big spot size could prompt the treatment speed, treatment speed and efficiency. Reduce treatment time for original 1/5.
9) The power module design is suitable for import and export business. It is convenient to maintenance.
host machine 2 years
we have special technician team, they are available by On-line talk telephone, email
•24 hours on line
•resolve questions in 3 work days
If any question about our machine, ask them freely. what's more,We have our own
factory and high quality products.we promise that we will help the ustomer solving the question in 3 working days.
What's more, we will also provide face to face online training, on site training,DVD, Video training, Operation manual, 24hours callingservice about our ipl machines,etc.
About us:
KLSi (Beijing)International Technology Co., LTD is a global high-tech company, integrated with R&D, manufacturing, sales and services of aesthetic devices & medical devices like
Vacuum cavitation slimming, diode laser hair removal, Super IPL etc. For years, we have provided the professional OEM/ODM services for numerous factories and trading companies from domestic market. Nowadays we aim to further expand the overseas market working to
be a professional and trustable international OEM/ODM manufacturer of all aesthetic & medical equipment in the world.
FAQ:
Q:Is your machine safe for hair removal ?
A:Yes,our machine adopt Sapphire-Contact technology to keep your skin
comfortable during treatment.
Q:Is your machine’s quality guaranteed ?
A:Of course.We have the CE-Proven certificate and our production are well controlled.
Q:Why do I choose your machine?
A:Our machine has 20million guaranty shots compared with others’ 5 million
and our machine body guaranty 2years longer than others.
Q:How soon can I get my order?
A:We have our own factory to produce large quantity to guarantee the quick Delivery.
Q: What's package ?
A:We use strong and beautiful aluminum alloy box for long distance transportation
Q:Other contact information ?
A:QQ/Wechat:1783741878
Tell/Whatsapp:18233186370
Sincerely we hope we could have the chance to work with you.
Welcome to contact us or visit us in BDA, Beijing, China!!
Effective:
steady energy is achived by
a. Japan made Capacitors which stabilizes.
b. US made laser rod ensures 100,000,000shots.(every shot, steady energy) but during our testing it went to 10 million shots.
c. 2 filters(one to filter out all impurities out of water to keep flow in high speed, and other preventing ion influx and decreasing the chances of laser bar damage.)
d. Japan made radiator tube , so water is always clean and flows fluently giving pleasant feelings while treatment.
e. High speed DC pump made in germany, which keeps TEC chilled water flowing.
f. 2 different power supplies , one for TEC cooling system and other for pump screen and other systems.