1.Main Features of 808nm diode hair removal machine

1). Adopt advanced spare parts as follows:

   -Germany Dilas laser bar arrays (Top brand, same Soprano's) ;            

   -Germany radiator fan;             

   - Italy water pump;                                                

   - US heat-exchanger;             

   - US Filters;

2). More than 20, 000, 000 shots (within one year ) ensure longer lifetime than  other hair removal      machine; 

3). Aggressive cooling capacity and water management , enable our handpiece  keep shooting 

    10 hours continuously;

4). Incoporate with the Soprano (Alma Laser) technology, with SHR by real micro  channel cooling     and up to 10HZ high repetition rate ;

5). Biggest and effective spot size 12*12mm, combined SHR, Only 5-7 minutes  for armpit hair removal, 1 hour for whole body only.

6). Quickest and safest hair removal  on all skin types I-VI and tanned skin----Safe enough to treat all patients year round to generate continuous laser hair removal revenue.

7).Patented Online monitor in real time ( water flow, water temperature, water pressure, over current, over voltage, overload, etc.) ensures the low failure rate and high safety of hand piece.

8). 9 optional kinds of language satisfying any requirement.

2System Characteristics:

1). The best laser wavelength

     The 808nm near infrared laser of Hair Removal System is best for absorbing melanin so that can effect in 

     different parts and hair follicle and reach to removing any hair effectively

2). Long laser pulse width

     Laser pulse duration is 10ms to 400ms adjustable, can do treatment effectively special for different hair 

     and lasting!

3). No pigmentation, used for any skin type.

     Terminator hair removal system uses penetrate technology and skin absorbs fewer lasers and no 

     pigmentation.

4).Sapphire touch cooling system can make sure that treatment more safe and no hurt to skin.

    Sapphire touch cooling system of hair removal system can make sure that doctor use the maximum 

    energy and can not hurt skin. This kind of cooling system can make sure that no hurt to skin when 

    patients are given more pressure. As reported, the pressure can increase 30%-40% light.

5). The big spot size can prompt the treatment speed.

     Terminator use 12*12mm big spot size. It makes sure that when do large area hair removal and 

      prompt treatment speed and efficiency. Because of big spot size, it can escape from repeated 

      treatment for hair area.

3.Advantage:

1).Our diode laser bar is imported from Germany, good quality and life can be                 10,000,000 shoots, handle piece can be use at least five to eight years.

Effective:

steady energy is achived by
a. Japan made Capacitors which stabilizes.

b. US made laser rod ensures 100,000,000shots.(every shot, steady energy)  but during our testing it went to 10 million shots.

c. 2 filters(one to filter out all impurities out of water to keep flow in high speed, and other preventing ion influx and decreasing the chances of laser bar damage.)

d. Japan made radiator tube , so water is always clean and flows fluently giving pleasant feelings while treatment.  

e. High speed DC pump made in germany, which keeps TEC chilled water flowing. 

f. 2 different power supplies , one for TEC cooling system and other for pump screen and other systems.

2).The screen has three working treatment mode, HR,SR,SHR, all treatment can be done in

    one machine.

3). Certification

4).Efficacy: 

  808nm wavelength laser, which is in the spectrum of near infrared (0.75-1.50μm) ,  could  be     absorbed by the melanin best, penetrates through the depth of dermis and adi pose tissue  and     then act on the hairs with different positions and depths.

5).Pain free: 

 Sapphire cooling tip, cools the epidermis down to 0~4 °C. Offers cooling all they way, comfort  and without  pain.

4.Working Principal: 

The 808nm diode laser hair removal using special laser with long Pulse-Width 808nm, can penetrate to hair follicle.Using selective light absorption theory, laser can be preferentially absorbed by the melanin of the hair and then heating the hair shaft and hair follicle, moreover to destroy the hair follicle and oxygen organization around hair follicle. When laser outputs, system has special cooling technology to cool the skin and protect skin from being hurt and reach a very safe and comfortable treatment.

5.Specification:

High Energy Output: Make sure good effective for any coloring matter ------------------120J 

Long Pulse Width: Make sure heating hair follicle, lasting hair removal---------------10~400ms

Big Spot Size: Fast and Effective Results -------------------------------------------------------12*12mm

Strong Cooling: Instance cooling skin, safe and comfortable --------------------------------5℃

Fast Speed:Slide treatment to make it safety and convenience----------------------------10HZ

Treatment characteristics

1.Terminator 808 + combines the benefits of all 3 wavelengths, It is groundbreaking for the laser hair removal industry.

2. combined wavelengths covering the optimal treatment spectrum 808nm 755nm 1064nm,  the treatment Characteristics for different hair

3.Virtually painless

4.All skin types, even tanned skin

6.Application:

Skin types:

Mode:

HR(Traditional hair removal mode energy)

Axillary, Chest, Arm, Back, Leg

Hairline, Cheek, Lip, Beard, Bikini

FHR (Energy of fast hair removal mode)

Axillary, Chest, Arm, Back, Leg

Hairline, Cheek, Lip, Beard, Bikini

7.Treatment Process:   

1). Clean skin

2). Shave hair(Leave short hair about 1mm)

3). Remove remained hair on skin

4). Lay gel on skin(Suggest to use natural gel without alchol and colour element

    gel thickness should be about 0.3cm-0.5cm)

5). Parameter adjust(Please refer to manual book or treatment part of video)

6). Treatment

7). Clean skin after treatment with water

8). Water replenishing

  Warranty
                  host machine  2 years      

                  we have special technician team, they are available by On-line talk,

                  telephone, email etc .

                   •24 hours on line 
                   •resolve questions in 3 work days 

                 If any question about our machine, ask them freely. what's more,We have                      our own factory and high quality products.we promise that we will help the                      customer solving the question in 3 working days.

                 What's more, we will also provide face to face online training, on site                              training, DVD, Video training, Operation manual, 24hours calling

                 service about our ipl machines,etc.

KLSi (Beijing)International Technology Co., LTD is a global high-tech company, integrated with R&D, manufacturing, sales and services of aesthetic devices & medical devices like Vacuum cavitation slimming, diode laser hair removal, Super IPL etc. For years, we have provided the professional OEM/ODM services for numerous factories and trading companies from domestic market. Nowadays we aim to further expand the overseas market working to be a professional and trustable international OEM/ODM manufacturer of all aesthetic & medical equipment in the world.

FAQ:   

Q

A

  comfortable during treatment.

Q

A

  are well controlled.

Q

A

  and our machine body guaranty 2years longer than others.

Q

A

  Delivery.

Q What's package ?  

AWe use strong and beautiful aluminum alloy box for long distance 

  transportation

Q How about the Delivery methods ?

Awe can offer the door to door service by air or by sea, just depend on your 

  actual request. Such as DHL, TNT.

QOther contact information ? 

AQQ/Wechat:1783741878

    Tell/Whatsapp:18233186370

Sincerely we hope we could have the chance to work with you.
Welcome to contact us or visit us in BDA, Beijing, China!!