Remove Tiny Wrinkle Elight Ipl Rf / Ipl Elight Pigment Removal Machine / Pigment Corrector (CE Approcval ) Medical
USD $1,000 - $5,000 /Set
Min.Order:1 Set
Weifang Huamei Electronics Co., Ltd.
Applications of opt ipl shr hair removal machine
1. Skin rejuvenation and skin whitening for the whole body;
2. Stretch marks, forehead wrinkles, crow's feet, nasal furrow wrinkles, neck wrinkle;
3. Painless and permanent hair removal;
4. Freckle/chloasma/age pigment/sunburn/chorioplaque removal, eliminating chromatosis;
5. Anaphylatic pox, acne, acne scar, blackhead;
6. Red face, red blood streak, acne resacea, etc.
elight ipl rf / ipl elight machine / pigment corrector (CE Approcval )
model: HM-Elight-B3
Characteristic
E-light machine is combined with IPL and RF ,so it can decrease burn risk and uncomfortable feeling significantly and no side effect.
Theory
It combines three advanced technologies: Bipolar Radio Frequency + IPL +Skin Contact Cooling.
When the three are united in one treatment, wonderful treatment experience and result can be expected. The energy of Radio Frequency can reach the middle and deep layer of the skin and heat up tissue, thus, lower energy is applied during the IPL treatment. Uncomfortable feeling during the IPL treatment will be decreased significantly and better result can be expected. In addition, cooling system involved in E-light can also ease the uncomfortable feeling.
The absorbing of the energy of radio frequency is not concerned with melanin. So, the E-Light treatment can get good result on the soft or thin hair so as to decrease the risk caused by traditional IPL treatment.
Parameters
Technical Specification: | E-LIGHT IPL Treatment System with RF function (2 Handpieces) |
Light Source: | Intense Pulsed Light |
Wavelength: | 420/510/560/640~1200nm (IPL+RF Standard) 480/585~1200nm (Optional) |
Spot size: | Fixed hand piece:8 x 40 mm² |
Changeable Hand piece: | 12 x 45 mm², 12x30 mm² |
Cooling System: | Air & Close Water Circuitlation & Treatment head with semiconductor cooling temperature adjustable |
IPL Light Energy: | 10~50 J/cm2 |
RF Energy: | 1~10MHz (Bi-Polar) |
Pulse Duration: | 2~15ms |
Pulse Sequence: | 1~15 pulses (adjustable) |
Pulse Delay Time: | 5~50 ms |
Integrated Skin Cooling: | -4~ +10 |
Operative Interface: |
Technical Advantages |
Prepay Light Shots: | Selectable and Management by USB joint built in the machine |
Electrical Source: | 220V / 50Hz or 110V 60Hz |
accessory
various treatment head
Package:
Questions which clients focus on:
A, what Certificate your products have?
(a.1) ISO 13485
System Characteristics
1.The treatment head of E-light mainly combined with three parts: bipolar radio frequency+low-energy pulse light energy+epidermal cooling.
2.Treatment result is obviously enhanced on clinic,and the various skin problems like wrinkle and telangiectasia are greatly improved.
3.Multi-features of E-light machine lead to the machine as the best choice for patient:comfortable treatment,better effect,faster results and minimal side effects,etc.
4.Adapting to the wider population,safe to all kinds of skin types,it also can be used for the treatment of skin Type IV and skin type V.
5.Easy operation,you only need to adjust the energy of IPL and RF individually.
6.Pre-cooling to the epidermis,this can result in temperature difference between epidermis and dermis,the energy lunched by RF act on the pre-warmed aimed-tissue(such as veins,hair follicles,melanin,etc.),so as to achieve the best RF penetration effect.
ISO 13485 is an international approval for recognizing the Quality&Management system of Professional Medical manufacturer.
(a.2) CE 1023
Our equipment have got CE 1023 medical approval. Client of most countries can get import permission with CE1023.
(a.3) SFDA
The exportation of our products is not restricted.
B, If your company offer ODM/OEM, any cost?
Our company is one of the leading manufacturers in China and could offer OEM/ODM without any design charge.
C, What’s your Warranty condition?
Our company could offer 1~2 year free warranty for inconsumable parts.
Our company offer lifetime maintenance and support.
D, If your company offer Training?
Our company offer training by three ways: Manual, video, one-line; we welcome your visit to our company for further training.
We are the best manufacturer which you are looking for in China. Please feel free to send your enquiry to us.
best regards,
Henry Chen