Application:

 

1. Application Range of Fractional treatment handpiece
    a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
    b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
    c. Reconstruction of photoaging skin.

2. Application Range of Incision Handpiece
    a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
    b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc

 

Specifications

*. Medical CE, ISO, TGA approved
*. OEM, ODM
*. Best training and service
*. Fast delivery

co2 laser fractional skin repairing equipment      

model: HM-LT200

CO2 fractional laser system with scanner

Fractional laser is the newest and hottest laser technique in the last two years and also attracts the most attention of hairdressing technology all over the world. it is a micro-invasive treatment between invasive and noninvasive. Fractional laser was called fractional Photothermolysis with English theory, which was first expressed by Dr. Rox Anderson, a laser medicalspecialist of Harvard University, in 2004. Immediately, that was agreed by specialist all over the world and applied to the clinical treatment reapidly.

Fractional Photothermolysis is a stretch theory of traditional Selective Photothermolysis. Not only the rapid and remarkable effect with invasive therapy, but also the advantage of less side effects and short recovery time with noninvasive.

Application

*. Skin regrowth promotion, renewing and resurfacing.

*. Wrinkle removal, skin tightening, improving the elasticly.

*. Acne removal, Repairing scars result for acne, burn and surgery etc.

*. Removing stubborn speckles pigmentation.

*. Reparing skin hurt by sun or light treatment.

Features

*. 8.4 inches large-colored touch screen. Comprehensive Operator Interfaces greatly simplify the time of learning so as to bring our client economic benefit more effectively.

*. Maximum output power of 30W. Ensure the clinical demand of maximum output power, thus safeguarding validity of a single monopulse peeling various skin organization and best effect.

*. The unique fractional output. Application of galvanometer scanning model actively provide as much ad seven speckle patterns that guarantee each part get the treatment evenly in the facial.

*. The unique choice of focal spot density. Doctors can choice treatment area of exfoliative organization freely, which could easily hold the patient of appeal, tolerance and postoperative complications.

*. The unique Atlantic technology. CO2 fractional laser can change to CO2 Ultra Pulse laser by switching interface easity.

*. Equipped with various treatment tools. To satisfy different parts of the organization in different treatment needs.

                                                                                                                                                                            

Parameters

CO2 laser system

The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.

The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.

Laser type	Carbon Dioxide Fractional Laser
Laser wavelength	10600nm
Laser power	Up to 40W (optional)
Light system	7 joint arms
Pulse duration	100-5000us
Facula	Single mode
Focussed diameter of the beam	0.25mm
Focal area	0.05mm2
Output form	Ultra Pulase, fractional
Scanning Mode	Sequence, random, parallel (switchable)
Scanning shapes	Triangle/square/rectangle/round/oval/hexagon/linear
Area of diagram	≤20mm*20mm
Interface colourful touch screen	8.4 inch
Refrigerating system	Air-cooling, water-cooling
Input power	AC230V±10%, 50Hz/ AC 110V ± 10% 60Hz
Work Mode	Intermittent loading

The environment requirements

*. Working temperature scope: 10 °c ~30 °c

*. Relative humidity scope: ≤80%

*. Atmospheric pressure barometric: 86kpa~106kpa

*. The store environment temperature: 0 °c ~55 °c

treatment show:

                                                                                                                        

 

CLIENTS FOCUS ON FOLLOWING QUESTIONS

Technology of Ultrapulse
Mainly let the original average output of the laser energy concentrated in a very short period of time then output, due to the high pulse power, short time, and more round spot, the pressure on the surface from laser heat transfer effects is low (small heat-affected zone).

A, what Certificate your products have?

 (a.1)   ISO 13485 

 ISO 13485 is an international approval for recognizing the Quality&Management system of Professional Medical manufacturer.

(a.2)  CE 1023 

Our equipment have got CE 1023 medical approval. Client of most countries can get import permission with CE1023. 

(a.3) SFDA

The exportation of our products is not restricted.

B, If your company offer ODM/OEM, any cost?

Our company is one of the leading manufacturers in China and could offer OEM/ODM without any design charge.

C, What’s your Warranty condition?

Our company could offer 1~2 year free warranty for inconsumable parts.

Our company offer lifetime maintenance and support.

D, If your company offer Training?

Our company offer training by three ways: Manual, video, one-line; we welcome your visit to our company for further training. 

                                                                                                                          

What kinds of people are suitable for Laser treatments?

*. People who want younger look.

*. People who want to beauty their face contour.

*. People who do not want to receive plastic surgery.

*. People who want to improve their appearance.

*. People who want to further satisfy their proper-pride.

*. People who want to make themselves more confident.

*. People who want to tighten their flabby skin and improve their face contour through non-operation and non-invasive way. 

                                                                                                                         

Is it painful during Laser treatments?

The energy for most of treatments is between level 2 to 3, and the epidermis is cool, therefore, it is not painful at all.

 

Package:

We can send the machine by airfreight, express and by sea. The machine is packed with aluminum foamed box safely.

Any Interests, please feel free to contact me.

OUR VALUE MESSAGE IS “QUALITY IS OUR CULTURE”
“WITH US YOUR MONEY IN SAFE YOUR BUSINESS IN SAFE”
1. 100% after-sales quality assurance, Support Many payment method;
2. All other specifications of beauty equipment are available according to your requirement(OEM&ODM)! Factory price you will get from NUBWAY
3. We can provide professional operation training.
4. Nd yag laser, cryolipolysis machine, hair laser machine etc with CE certifications and strong supply ability.