Specifications

IPL&RF=E-light
More effective than ordinary IPL
Obvious result and no any other effect
Using stably,Competitive Price

Application

 

1. Remove unwanted hairs;

2. Remove facial vascular lesions (Telangiectasis);

3. Clean and tighten visible pores;

4. Smooth fine wrinkles;

5. Make skin more flexible;

6. Improve the tone of skin and remove facial blemish;

7. Remove acne;

8. Skin whitening

 

 

Working principle

 

E-Light combines three advanced technologies: Bipolar Radio Frequency + IPL +Skin Contact Cooling. When the three are united in one treatment, wonderful treatment experience and result can be expected. The energy of Radio Frequency can reach the middle and deep layer of the skin and heat up tissue, thus, lower energy is applied during the IPL treatment. IPL energy has been absorbed by pigment, so pigment tissue has been heated enough to be broken down into lots of tiny particle, then they are metabolized through lymphatic system, so effect can be achieved perfectly. Uncomfortable feeling during the IPL treatment will be decreased significantly and better result can be expected. In addition, cooling system involved in E-light can also ease the uncomfortable feeling. The absorbing of the energy of radio frequency is not concerned with melanin. So, the E-Light treatment can get good result on the soft or thin light color hair so as to decrease the risk caused by traditional IPL treatment

 

 

 

 

 

Features of our product

 

 

 

 

 

• IPL together with Bi-polar Radiofrequency functions
• High quality crystal coupling ensures the photo therapy effect
• Dedicated handpiece for hair removing and skin rejuvenation
• Dedicated handpiece for RF thermal skin tightening and lifting
• Full size colorful touch screen control panel with user friendly programs.
• User customized settings which can be recalled at any time.

 

The Technical Prarameters 

 

 

 

Wavelength (Spectrum)	430/530/590/640/690-1200nm (standard) 480/590/750-1200nm (optional)
Energy Density (Fluence)	10-50J/cm2
Spot Size	15*30mm² (standard)
Pulse Repetition Rate	0.2Hz; 2Hz
Pulse Duration	0.5-15ms
Pulse Delay	1-50ms
Pulses	1-15 pulses
IPL Peak Power	800W
Cooling	Continuous Crystal contact cooling (-4°C~2°C ) + Air cooling + Closed water circulation cooling
Stand-by Working	Continuously for 12 hours
Display	8." True Color LCD Touch Screen
Electrical Requirements	100-240VAC, 20A max., 50/60Hz
Net Weight	25 kgs
Dimensions (WxDxH)	48*50*53cm

 

 

 

 

More  Photoes  Of  Our Machine

 

 

 

 

 

 

Efficiency  Pictures  Before  and After

 

 

 

The Standard Air Box