Ultra Pulse Best Quality Top Birth Mark Removal Sell Rf Fractional Co2 Laser Equipment
USD $1 - $10,000 /Set
Min.Order:1 Set
Beijing Fupeng Photoelectricity Technology Ltd.
CO2 laser system
The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.
The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.
Best quality top sell rf fractional co2 laser equipment
Fractional laser is the newest and hottest laser technique in the last two years and also attracts the most attention of hairdressing technology all over the world. it is a micro-invasive treatment between invasive and noninvasive. Fractional laser was called fractional Photothermolysis with English theory, which was first expressed by Dr. Rox Anderson, a laser medicalspecialist of Harvard University, in 2004. Immediately, that was agreed by specialist all over the world and applied to the clinical treatment reapidly.
Fractional Photothermolysis is a stretch theory of traditional Selective Photothermolysis. Not only the rapid and remarkable effect with invasive therapy, but also the advantage of less side effects and short recovery time with noninvasive.
Applications of rf fractional co2 laser equipment
Action principle
Fractional laser treatment is using laser drilling tiny holes on skin evenly, which cause a series of skin biochemical reactions. Achieving refirming, tender skin and remove stain. As fractional laser treatment can only cover partial skin tissue and the new drilled holes won't overlap with each other, part of normal skin gets reserved to speed up recover. The patient will return to normal life in four or five days. The therapy itself is safe and can cure any part of the body. The indication include acne scars, stain, surgery scars, traumatic scars, scalded scars, chloasma, civatte poikiloderma, wrinkle, flabby, light aging and etc. These clinical application are used in domestic and international with confirmed efficacy.
Main features
1. with 8.4 inches large-colored touch screen. Comprehensive Operator Interfaces greatly simplify the time of learning so as to bring our client economic benefit more effectively.
2. Maximum output power of 30W, ensuring the clinical demand of maximum output power, thus safeguarding validity of a single monopulse peeling various skin organizations and best effect.
3. The unique fractional output. Application of galvanometer scanning mode actively provide as much as seven speckle patterns that guarantee each part gets evenly in the facial.
4. The unique choice of focal spot density. Doctors can choice treatment area of exfoliative organization freely, which could easily hold the patient of appeal, tolerance and postoperative complications.
5. The unique Atlantic technology. CO2 fractional laser can change to CO2 Ultra Pulse laser by switching interface easily.
6. Equipped with various treatment tools. To satisfy different parts of the organization in different treatment needs.
Parameters of rf fractional co2 laser equipment
Laser Type | Carbon Dioxide Fractional Laser |
Laser Wavelength | 10600nm |
Laser power | up to 40W(optional) |
Light system | 7 joint arms |
Pulse Duration | 100-5000us |
Facula | single mode |
Focussed diameter of the beam | 0.25mm |
Focal area | 0.05mm2 |
Output form | Ultra Pulse, fractional |
Work Mode | Intermittent loading |
Scanning Mode | Sequence, random, parallel (switchable) |
Scanning Shapes | Triangle/square/rectangle/round/ oval/hexagon/linear |
Area of diagram | ≤20mm*20mm |
Interface Colorful Touch Screen | 8.4 inch |
Refrigerating system | Air-cooling, water-cooling |
Input Power | AC 230V±10%,50HZ/ AC 110V±10% 60HZ |
Net weight | 50Kg |
Gross weight | 62Kg |
More Pictures of rf fractional co2 laser equipment
Theory - co2 fractional laser
The Package - Air box
Our service
1.Your inquiry related to our products or prices will be replied in 24 hrs.
2.Well-trained and experienced staffs to answer all your inquires in fluent English
3.OEM&ODM, any your customized products we can help you to design.
4.Distributorship are offered for your unique design and some our current models
5.Protection of your sales area, ideas of design and all your private information.
Warranty:We have 1 years Warranty,lifetime maintenance.Within warranty, we offer free repairingservice and provide replacement parts for free.
rf fractional co2 laser equipment
Technology of Ultrapulse
Mainly let the original average output of the laser energy concentrated in a very short period of time then output, due to the high pulse power, short time, and more round spot, the pressure on the surface from laser heat transfer effects is low (small heat-affected zone).