Treatment theory

e-light beauty equipment CE beauty machine combines three advanced technologies:Bipolar Radio Frequency + IPL + Skin Contact Cooling 

The working theory is heating the dermis to a target temperature gradually,at that target temperature, it damages the hair follicles and prevents re-growth effectively,meanwhile avoiding injury to the surrunding tissue.A high repetition rate of single pulses are delivered deep into the dermis,achieving high average power and therappeutically effectively heat bulit-up,without the risk of injury and no pain virtually.

CO2 laser system

The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.

The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.

co2 fractional laser for vascular lesion cosmetic clinic equipment

How does it Works?

Fractional skin resurfacing with nubway uses laser energy microbeams to create areas of affected tissue that extend through the epidermis into the dermis. These areas can be either "non-ablative" (the laser beams coagulate the affected tissue) or "ablative" (the laser beams vaporize the affected tissue).

Non-ablative procedures are minimal to no downtime procedures, while ablative procedures provide a single treatment option.  The body's natural healing process creates new, healthy tissue to replace the areas of affected tissue, resulting in healthier, younger-looking skin.

Feature of co2 fractional laser for vascular lesion cosmetic clinic equipment
1.The rf laser output better laser mode,smaller laser focal spot,and higher density of the power . It also has higher ability to penetrating tissue and less injured for the histiocyte. With little healing time the customer would enjoy more comfortable treatment.
2.The RF tube could scan stable spot size. When do the treatment the laser would put out
uniform power with steady spot size,distance and depth so it coud improve the effect.
3.The RF Franctional laseradopt to Ceramic resonator. It has better Sealing than the glass tube laser. The life of the RF tube is twice as the usual glass tube.
4.With good stability the powersource works very well. The rf laser seprate with the powersource which could ensure longer workinglife and stability. Also it could lessen faultrate and it's convenient to repair.
5. The frequency of RF Tube is 5000hz-2000hz which is more suitable to subtle
surgical treatment

Application for co2 fractional laser for vascular lesion cosmetic clinic equipment

Smooth out wrinkles and fine lines
Flatten worry and frown lines
Clear up sun-damaged skin
Decrease appearance of acne scars
Shrinking the appearance of pores
Flatten traumatic scars
May lessen bags and circles under eyes
Decrease jowls and improve angle of the jaw
Remove age

           

Main Technical Parameters:    

Laser wavelength: 10.6µm                                                            

Laser unit:TEM00 module Co2 unit (best quality for the facula)                    

Output power: super pulse output 0.3-7W, peak value 450W,continuous output 0.3-25W

Laser output mode: continuous, single pulse, repeat pulse, super pulse, with the optional pixel laser handpiece for Pixel laser output mode

Conducting system: seven joints longer articulated arm(the most advanced conducting light system in the world and the only one in China). It could be operated in the scope of R=1.7m, which makes the operation more flexible    

Handpiece:multiple function handpiece and two kinds of focus lens for f=100mm and f=50mm. With the optional adapter, it could be used for orthopedic, gynaecology and ENT surgery 

Operation mode:controlled by a touch screen and with the engineer interface and the doctor interface  

Min. spot diameter:≤0.1mm, variable spot adjusting handpiece:0.1-2.5mm          

Pulse width: the minimum pulse width is 0.1ms  

Application:

1. Application Range of Fractional treatment handpiece
    a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
    b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
    c. Reconstruction of photoaging skin.

2. Application Range of Incision Handpiece
    a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
    b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc

Fuctions and treatment effect of elight ipl rf 

1.Permanent hair removal.

2.Smooth wrinkles, face-lifting
3.Deep flecks, epidermis flecks or pigment treating the telangiectasis
4.Promote collagen to grow, strengthen flexibility of skin
5.Acne treatment
6.Shrink the thick pore
7.For endogenous pigment: nevus of Ota, coffee spot, age pigment, freckle etc removal
8.For exogenous pigment: tattoo, eyeliner and eyebrow removal
9.Skin whitening
10.Striae gravidarum removal