CO2 Laser System, buy 10600nm 2014 Newset Fractional Co2 Laser Equipment Skin Resurfacing on China Suppliers Mobile

Product Details

CO2 laser system

The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.

The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.

The laser RF tube of the Franctional laser machine

And matching power source are imported from American.

Feature of 2014 newset fractional co2 laser equipment

Technology of Ultrapulse
Mainly let the original average output of the laser energy concentrated in a very short period of time then output, due to the high pulse power, short time, and more round spot, the pressure on the surface from laser heat transfer effects is low (small heat-affected zone).

1.The rf laser output better laser mode,smaller laser focal spot,and higher density of the power . It also has higher ability to penetrating tissue and less injured for the histiocyte. With little healing time the customer would enjoy more comfortable treatment.
2.The RF tube could scan stable spot size. When do the treatment the laser would put out
uniform power with steady spot size,distance and depth so it coud improve the effect.
3.The RF Franctional laseradopt to Ceramic resonator. It has better Sealing than the glass tube laser. The life of the RF tube is twice as the usual glass tube.
4.With good stability the powersource works very well. The rf laser seprate with the powersource which could ensure longer workinglife and stability. Also it could lessen faultrate and it's convenient to repair.
5. The frequency of RF Tube is 5000hz-2000hz which is more suitable to subtle
surgical treatment

Spare parts:

Application:

Smooth out wrinkles and fine lines
Flatten worry and frown lines
Clear up sun-damaged skin
Decrease appearance of acne scars
Shrinking the appearance of pores
Flatten traumatic scars
May lessen bags and circles under eyes
Decrease jowls and improve angle of the jaw
Remove age $2014 newset fractional co2 laser equipment$

Specification for 2014 newset fractional co2 laser equipment :

Application:

1. Application Range of Fractional treatment handpiece
a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
c. Reconstruction of photoaging skin.

2. Application Range of Incision Handpiece
a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc

Laser Type	RF-excited Co2 Laser
Aiming Beam	635nm
Beam Delivery	7-joint articulated arm
Spot size	0.12-1.2mm
Power supply	40w
Spot Pattern	Circle/Triangle/Square/Rectangle/Rhombus/Line/Ellipse
Power of the Aiming Beam	≤5mW
Laser Operating Mode	Ultra Pulse, fractional
Power supply	220V 50HZ ,110V 60HZ
Weight	58kg

What results can I expect?

With moderate to strong treatment you can expect an immediate tightening of the skin with some noticeable results seen in as little as one treatment. A single treatment can lessen the look of wrinkles and fine lines from your face for up to several months. More than one treatment may be needed for deep scarring to be removed. You can be assured a faster healing time than other treatments such as standard CO2 laser skin resurfacing, dermabrasions, and even deep chemical peels. You can also have a mild treatment with some improvement in skin texture and a quick

After service:

We have 1 year warranty, and lifetime maintenance.
Within one year, if there is some accessory going wrong, we will send you the accessory at once, free of charge.
1). Within one month, if the machine is of any big fails, we will send you a new machine.
2). Within one year, if you send back the equipment for repair, we will be
responsible for the repair, including the changes of accessories; both of them are free of charge.
3). After one years, we offer to repair the machine, but we ask for the cost of the changed parts, not for manual cost.
4). No responsibility for man-made destroy.
5). If the buyer has any questions from our technical department, we can supply on-line service.

OUR VALUE MESSAGE IS “QUALITY IS OUR CULTURE”
“WITH US YOUR MONEY IN SAFE YOUR BUSINESS IN SAFE”
1. 100% after-sales quality assurance, Support Many payment method;
2. All other specifications of beauty equipment are available according to your requirement(OEM&ODM)! Factory price you will get from NUBWAY
3. We can provide professional operation training.
4. Nd yag laser, cryolipolysis machine, hair laser machine etc with CE certifications and strong supply ability.