The RF equipment has the cooling system of surface layer, and uses proprietary technology

to deliver radiofrequency energy to the deep layers of the skin and its underlying tissue. The

heat will accelerate the blood circle, lets the fibre structure shrink instantaneously, and

stimulates the renewal of collagen. In response, the collagen shrinks and remodels over time,

providing you with tighter skin, renewed facial contours.

Main Technical Parameters:    

Laser wavelength: 10.6µm                                                            

Laser unit:TEM00 module Co2 unit (best quality for the facula)                    

Output power: super pulse output 0.3-7W, peak value 450W,continuous output 0.3-25W

Laser output mode: continuous, single pulse, repeat pulse, super pulse, with the optional pixel laser handpiece for Pixel laser output mode

Conducting system: seven joints longer articulated arm(the most advanced conducting light system in the world and the only one in China). It could be operated in the scope of R=1.7m, which makes the operation more flexible    

Handpiece:multiple function handpiece and two kinds of focus lens for f=100mm and f=50mm. With the optional adapter, it could be used for orthopedic, gynaecology and ENT surgery 

Operation mode:controlled by a touch screen and with the engineer interface and the doctor interface  

Min. spot diameter:≤0.1mm, variable spot adjusting handpiece:0.1-2.5mm          

Pulse width: the minimum pulse width is 0.1ms  

New hot sale high quality skin resurfacing pixel co2 fractional laser equipment ,

Advantages of 

CO2 laser system

The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.

The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.

Range of treatment of    skin resurfacing pixel co2 fractional laser equipment :

1. acne andacne scars removal

2. eyelids,crow's feetand otherfine linesaround the eyes,fine linesremoval

3. improvethe face andforeheadwrinkles,foldsandjointsstretch marks

4. Treatment freckles,cheekbonesand otherpigmented lesionsnevus

The range of IPL treatment:

(1)Everlasting hair removal:remove unwanted hairs under arms,on legs ,lips or other body part,etc.  

(2)Pigmentation treatment:remove various kinds of pigment such as freckle,chloasma,aged spots,sunburn,etc.

(3)Telangiectasis treatment:treat angiotelec-tasis.

(4)Acne treatment:papule,tuber,Blain,acne,etc.                 

(5)Shrink pores,tighten skin,improve skin elasticity and glossiness.

(6)Eliminate and smooth wrinkles,acne treatment.

5. firmingand liftingthe skin
6.remove stretch marksand otherdeepscars

Before and After

Treatment theory

e-light beauty equipment CE beauty machine combines three advanced technologies:Bipolar Radio Frequency + IPL + Skin Contact Cooling 

The working theory is heating the dermis to a target temperature gradually,at that target temperature, it damages the hair follicles and prevents re-growth effectively,meanwhile avoiding injury to the surrunding tissue.A high repetition rate of single pulses are delivered deep into the dermis,achieving high average power and therappeutically effectively heat bulit-up,without the risk of injury and no pain virtually.

Principle of RF CO2 Fractional Laser

 

CO2 Fractional Laser System fires a laser beam which is split into numbers of microscopic beams, producing tiny dot or fractional treatment zones within the selected target area only. Therefore, the heat of laser only passes deeply through the fractional damaged area. This allows the skin to heal much faster than if the whole area was treated. During the skin self-resurfacing, a great amount of collagen is produced for skin rejuvenation, eventually the skin will look much healthier and younger. 

   Aluminum Box

After service of     skin resurfacing pixel co2 fractional laser equipment :

Within one year, if there is some accessory going wrong, we will send you the accessory at once, free of charge.

1). Within one month, if the machine is of any big fails, we will send you a new machine.

2). Within one year, if you send back the equipment for repair, we will be responsible for the repair,including the changes    of accessories both of them are free of charge.

3). After one year, we offer to repair the machine, only charge the cost of the changed parts, not for manual cost.

4). No responsibility for man-made destroy.

5). If you have any doubts for the equipment, our technical department will offer you on-line service anytime.

new hot sale  high quality skin resurfacing pixel co2 fractional laser equipment

 Q1: What about the delivery?

Hoslaser reply: we can offer the door to door services by air or by sea just depend on your actual request. Such as DHL, UPS, TNT, FEDEX… by air; and the sea transportations.

Q2: Do you have any timely technology supports?

Hoslaser reply: we have a professional technology supporting team for your timely services. We prepare the technical documents for you, also you can contact us by telephone, webcam...

Q3: If the machines broken during the shipment, will you support us?

Hoslaser reply: generally our customer will purchase the insurance before shipment, avoid any money lost from rough transportation. Hoslaser will help you to solve the claims with the insurance companies to collect your money back in time.

Beijing hoslaser technology co.,ltd is the professional manufacturer of beauty machines , main products include laser system as 808nm diode laser ,fractional co2 laser , ndyag tattoo removal laser , ipl system ,elight system ,thermage system and slimming system , and oxygen jet care skin care system etc.

If you have any questions you can ask me any  time.

Alina Lee

Sales Manager

Skype:alinabeauty8888
Web:

Application:

1. Application Range of Fractional treatment handpiece
    a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
    b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
    c. Reconstruction of photoaging skin.

2. Application Range of Incision Handpiece
    a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
    b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc

Fuctions and treatment effect of elight ipl rf 

1.Permanent hair removal.

2.Smooth wrinkles, face-lifting
3.Deep flecks, epidermis flecks or pigment treating the telangiectasis
4.Promote collagen to grow, strengthen flexibility of skin
5.Acne treatment
6.Shrink the thick pore
7.For endogenous pigment: nevus of Ota, coffee spot, age pigment, freckle etc removal
8.For exogenous pigment: tattoo, eyeliner and eyebrow removal
9.Skin whitening
10.Striae gravidarum removal