15W(20W) Hot Sale Multifuncional Skin Wrinkle Removal Care Fractional Co2 Laser Equipment
Negotiable /Set
Min.Order:1 Set
Beijing Huasheng Weiye Development Co., Ltd.
Theory - co2 fractional laser
Fractional RF machine
Feature of laser scar removal equipment
1.The rf laser output better laser mode,smaller laser focal spot,and higher density of the power . It also has higher ability to penetrating tissue and less injured for the histiocyte. With little healing time the customer would enjoy more comfortable treatment.
2.The RF tube could scan stable spot size. When do the treatment the laser would put out
uniform power with steady spot size,distance and depth so it coud improve the effect.
3.The RF Franctional laseradopt to Ceramic resonator. It has better Sealing than the glass tube laser. The life of the RF tube is twice as the usual glass tube.
4.With good stability the powersource works very well. The rf laser seprate with the powersource which could ensure longer workinglife and stability. Also it could lessen faultrate and it's convenient to repair.
5. The frequency of RF Tube is 5000hz-2000hz which is more suitable to subtle
surgical treatment
Application:
1. Application Range of Fractional treatment handpiece
a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
c. Reconstruction of photoaging skin.
2. Application Range of Incision Handpiece
a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc
Application:
Laser Type | RF-excited Co2 Laser |
Aiming Beam | 635nm |
Beam Delivery | 7-joint articulated arm |
Spot size | 0.12-1.2mm |
Power supply | 40w |
Spot Pattern | Circle/Triangle/Square/Rectangle/Rhombus/Line/Ellipse |
Power of the Aiming Beam | ≤5mW |
Laser Operating Mode | Ultra Pulse, fractional |
Power supply | 220V 50HZ ,110V 60HZ |
Weight | 58kg |
Technology of Ultrapulse
Mainly let the original average output of the laser energy concentrated in a very short period of time then output, due to the high pulse power, short time, and more round spot, the pressure on the surface from laser heat transfer effects is low (small heat-affected zone).
The laser RF tube of the Franctional laser machine
And matching power source are imported from American
CO2 laser system
The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.
The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.