Dermafresh Micro Needle Fractional RF For Stretching Marks Removal
Negotiable /Set
Min.Order:1 Set
Beijing Forever Beauty Laser Technology Development Co., Ltd.
Pinciple of Dermafresh Micro Needle Fractional RF For Stretching Marks Removal
MNF is designed specially for delivering RF energy directly to epidermisor dermis layer in order to stimulate and re-model collagen effectively by either RF micro needling mode (invasive) or RF matrix mode (non-invasive). It can be used for both epidermal applications and dermal applications in one platform without changing any operational environment.
Microneedle fractional rf system is based on synergy effect of a precisely controlled Bipolar RF plus minimally invasive micro-needles for non-surgical face lifting.wrinkle reduction.
Such an ideal combination reduces treatment time and down time significantly comparing with
fractional laser besed treatment.Also,it can be treated for all skin type,even darker skin with low risk of skin burns and PIH.
Structure of Dermafresh Micro Needle Fractional RF For Stretching Marks Removal
Advantage of Dermafresh Micro Needle Fractional RF For Stretching Marks Removal
(1) No insulation Plating It is possible to operate equal therapy to Epidermis Layer and Dermis Layer as the needle do not have insulation Plating
(2) Needle depth control (0.25-3.0mm, 0.1mm step) Operates Epidermis Layer and Dermis Layer bycontrolling the needledepth in unit 0.1mm
(3) Stepping Motor Type Different to existing Solenoid Type, the needleinserts to the skin smooth with noshock andcauses lesser bleeding and pain after the operation
(4) Safety Needle System
-Sterilized disposable needle tip Operator can easily notice the applying RF energy from a red light
(5) Gold Plating
Needle is durable and also has high Biocompatibility by applying Gold Plating. Patient with metal allergy
could also use it with not concerning Contact dermatitis
(6) Cold&Heat HandleCool therapy use before MRF or SRF, can make the skin at a lowtemperature paralysis state, use afterMRF orSRF, it will soothing the skinand reduce swelling.The heat therapy can be used before MRF & SRF forfaciallymphatic drainage
(7) A variety of SFR treatment head is optional
(8) LED orientation: through the led orientation, the treatment area can be more accurate treated
Treatment Scope
Face treatment
(1) No-surgical Face Lifting
(2) Wrinkle Reduction
(3) Skin Tightening
(4) Skin rejuvenation(Whitening)
(5) Pore Reduction
(6) Acne Scars
Body Treatment
(1) Scars
(2) Stretch Marks
(3) Keratosis pilaris
Treatment Effect
Technical Parameter
System Type | Bipolar RF(Radio Frequency) |
Screen Size | 10.4 Inch TFT Color Touch Screen |
Frequency | 2MHZ |
Three Operation Mode | Microneedle Fractional RF(MFR) |
Superficial Fractional(SFR) | |
Cold&Heat Hammer | |
Total RF treatment Level | UP to Level 10 |
Treatment Duration Time | 1000-3000ms adjustable |
Disposable Tip | MFR tips: 25/49/81 Pin |
SFR Tip: 25Pin | |
Depth of Needle | 0.25-3mm adjustable |
Spot Size | 12*12mm |
Diode Laser Indicator | 650nm,50mw |
Cooling Liquid | Pure Water or Distiller Water |
Voltage | AC 110V/220V ,69Hz/50Hz |
Net Weight | 36KG |
Dimension | 45*44*140cm |
Certificate
Production Proccess
Package Detail
FAQ
(1) How does the procedure work?
The ThermaCool system works with a highly developed treatment unit called ThermaTip that emits a
controlledamountof highfrequency energy. With each contact with the skin, the ThermaTip uniformly
heats up a large amount of collagen in the deeper layers of the skin and the subjacent tissue,
while at the same time protecting the outerayer of the skiby cooling it. This deep heating leads to an immediate firming of structures deep in your skin.With time, new and regeneratedcollagen will be produced, bringing about further firming and smoothing of the skin.
(2)How does the treatment feel?
With each contact with the ThermaTip treatment tip you will feel a short, deep sensation of heat that is created by thesupplyof highfrequency energy into the skin and tissue. This feeling of heat is a sign that yourcollagenhasreached a temperaturethat is ideal for firming. For the protection of your skin,
the treatment tip is cooled before, during and after heating. This makesthe treatment more pleasant. Depending on your sensitivity to pain, you may be given a light sedative or analgesic – anaesthesia is not necessary.
(3) How long does the procedure take?
The treatment may take between 30 minutes and a little over an hour, depending on the size of the area to be treated. Some further time may be required to prepare the skin before the treatment.
(4)How does my skin feel after the treatment?
Your skin should feel firmer, smoother and more youthful immediately after the treatment.
With time you will notice further firming.
(5) How many treatments do I need?
For the majority of patients even a single treatment produces the desired results. Your physician can determine the duration of therapy that is especially suited for you.
(6) When can I see results?
Studies carried out bymicroneedlefractionalRFand published recentlyshow that there are visible changes immediately after the treatment as well as measurable improvements of the firming effect gradually over 2 to 6 months after a single treatment. However, many patients report that they have noticed reactions even earlier.
(7) How long does the effect of the Thermalift procedure last?
According to unpublished reports by experienced doctors, the results last at least 24 months or even longer,depending on the natural ageing process of the patient and the intensity of external influences that have an effect on the skin after the treatment.
(8) Is the procedure safe?
Existing studies and research data have confirmed that themicroneedleractionalRFprocedure is currently one of themost effective and safest nonsurgical methodsof treatment for face wrinkles and skin creases. More than300,000 treatments have resulted in a level of safety of 99.8%. Please speak to your doctor about the proof of safety of this procedure.