100um-2000um Glass Tube CO2 Laser/ Co2 Fractional Laser/ Co2 Fractional Laser Equipment Birth Mark Removal
USD $1 - $8,000 /Set
Min.Order:1 Set
Shandong Huamei Technology Co., Ltd.
Technology of Ultrapulse
Mainly let the original average output of the laser energy concentrated in a very short period of time then output, due to the high pulse power, short time, and more round spot, the pressure on the surface from laser heat transfer effects is low (small heat-affected zone).
glass tube CO2 laser/ co2 Fractional laser/ co2 fractional laser equipment
Working Theory
The fractional laser is adopting the most advanced Electronics of Ultra Pulse CO2 laser and scanning technique of full automatic computer accuracy control, and utilizing CO2 laser heat penetration, under the guidance of the precise scanning of galvanometers, CO2 fractional laser forms minimally invasive holes in matrix form with diameter of 0.12mm on skin; under the energy and heat of laser, tissues around wrinkles or scars are symmetrically gasified instantaneously and the micro heating area comes into being. It stimulates the collagen protein synthesis and then activates some cutaneous reactions, such as tissue repair and collagen rearrangement. The random breeding and regeneration of fresh collagen makes skin tight and lustre, reduces wrinkles, eliminates pouch and flattens scars. At the same time of tendering skin and removing wrinkles, large pigment and spots are blasted into dust or they are taken out of the body via exuvium or lymphatic circulation with the effects of skin tightening, skin tendering, pigment spots removal and skin whitening.
Fractional laser therapy covers partial skin tissues and new holes can’t be overlapped by each other. So the normal skin is reserved and it accelerates the recovery of normal skin. During the treatment, the water in skin tissues absorbs laser energy and then vaporizes into many micro lesion areas in cylinder shape. The collagen in micro lesion areas shrinks and increases. And normal skin tissues as the thermal diffusion areas can prevent side-effects caused by heat injury. Simultaneously, it promotes the quick healing of the skin achieving the effects of skin tightening, skin tendering, scar removal, pore shrinkage, etc.
The target of fractional laser is water, so CO2 fractional laser is appropriate for all skin colors. Another advantage of fractional laser is that it can scatter the faculas with dense and huge energy into hundreds of minute focal spots. It scatters heat symmetrically, relieves pain greatly and reduces the side-effects of laser treatment.
Clinical Applications
CO2 laser possesses the functions of cutting and grinding skin, vaporizing tissues,
stopping bleeding, fusion, ablation and sterilization, etc. It promotes the quick healing and
reconstruction of skin, remodeling and regeneration of collagen. Fractional laser
equipment possesses multi-heads. Customers can change the treatment heads to
produce multiple uses.
1. Laser resurfacing surgery
2. Laser wrinkle removal surgery
3. Laser scar removal surgery
4. Laser blepharoplasty
5.Other applications: Removal of pimented naevus, chloasmas, freckles, age
pigments, warts, seborrheic keratosis, syringoma, acnes, milia, striae gravidarum; Pore
shrinkage; Skin tightening; Laser hairtransplant; Laser breast augmentation; Laser hair
removal, and etc.
Main features
1. with 8.4 inches large-colored touch screen. Comprehensive Operator Interfaces greatly simplify the time of learning so as to bring our client economic benefit more effectively.
2. Maximum output power of 30W, ensuring the clinical demand of maximum output power, thus safeguarding validity of a single monopulse peeling various skin organizations and best effect.
3. The unique fractional output. Application of galvanometer scanning mode actively provide as much as seven speckle patterns that guarantee each part gets evenly in the facial.
4. The unique choice of focal spot density. Doctors can choice treatment area of exfoliative organization freely, which could easily hold the patient of appeal, tolerance and postoperative complications.
5. The unique Atlantic technology. CO2 fractional laser can change to CO2 Ultra Pulse laser by switching interface easily.
6. Equipped with various treatment tools. To satisfy different parts of the organization in different treatment needs.
Parameters
Laser Type | Carbon Dioxide Fractional Laser |
Laser Wavelength | 10600nm |
Laser power | up to 40W(optional) |
Light system | 7 joint arms |
Pulse Duration | 100-5000us |
Facula | single mode |
Focussed diameter of the beam | 0.25mm |
Focal area | 0.05mm2 |
Output form | Ultra Pulse, fractional |
Work Mode | Intermittent loading |
Scanning Mode | Sequence, random, parallel (switchable) |
Scanning Shapes | Triangle/square/rectangle/round/oval/hexagon/linear |
Area of diagram CO2 laser system The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis. The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate. | ≤20mm*20mm |
Interface Colorful Touch Screen | 8.4 inch |
Refrigerating system | Air-cooling, water-cooling |
Input Power | AC 230V±10%,50HZ/ AC 110V±10% 60HZ |
Weight | 58kg |
Interface of HM CO2 Fractional laser
SHANDONG HUAMEI TECHNOLOGY CO.,LTD.!
Shandong Huamei Technology Co.,ltd (Shorted as Huamei) located in the beautifuly International capital of Kite-Weifang city of China. Huamei is a professional high-tech company specialized in the development, production, sales and service of E-light, IPL, Diode laser, CO2 fractional laser, Microdermabrassion, Q-switch Nd Yag laser, RF and Cavitation medical equipments in China.
Our quality products also are hot selling items both at home and abroad. We enjoy sound reputation of high-tech beauty equipments as IPL skin rejuvenation system, Q-switch Nd Yag laser, RF device, RF& IPL system and cavitation system etc. Our products are widely used at the department of beauty salon and dermatology hospital and medical insitute. Our products are certified by CE1023, ISO13485, SFDA, etc.
After sales service:
1. Within one month, if the machine is of any big fails, we will send you a new machine.
2. Within one year, if you send back the equipment for repair, we will be responsible for the repair, including the changes of accessories; both of them are free of charge.
3. After two years, we offer to repair the machine, but we require for the cost of the changed parts, not for manual cost.
4. If the buyer has any questions from our technical department, we can supply on-line service.
Clients focus on following questions,
A, what Certificate your products have?
(a.1) ISO 13485
ISO 13485 is an international approval for recognizing the Quality&Management system of Professional Medical manufacturer.
(a.2) CE 1023
Our equipment have got CE 1023 medical approval. Client of most countries can get import permission with CE1023.
(a.3) SFDA
The exportation of our products is not restricted.
B, If your company offer ODM/OEM, any cost?
Our company is one of the leading manufacturers in China and could offer OEM/ODM without any design charge.
C, What's your Warranty condition?
Our company could offer 1~2 year free warranty for inconsumable parts.
Our company offer lifetime maintenance and support.
D, If your company offer Training?
Our company offer training by three ways: Manual, video, one-line; we welcome your visit to our company for further training.
OUR VALUE MESSAGE IS “QUALITY IS OUR CULTURE”
“WITH US YOUR MONEY IN SAFE YOUR BUSINESS IN SAFE”
1. 100% after-sales quality assurance, Support Many payment method;
2. All other specifications of beauty equipment are available according to your requirement(OEM&ODM)! Factory price you will get from NUBWAY
3. We can provide professional operation training.
4. Nd yag laser, cryolipolysis machine, hair laser machine etc with CE certifications and strong supply ability.