Treatment theory

e-light beauty equipment CE beauty machine combines three advanced technologies:Bipolar Radio Frequency + IPL + Skin Contact Cooling 

The working theory is heating the dermis to a target temperature gradually,at that target temperature, it damages the hair follicles and prevents re-growth effectively,meanwhile avoiding injury to the surrunding tissue.A high repetition rate of single pulses are delivered deep into the dermis,achieving high average power and therappeutically effectively heat bulit-up,without the risk of injury and no pain virtually.

Main Technical Parameters:    

Laser wavelength: 10.6µm                                                            

Laser unit:TEM00 module Co2 unit (best quality for the facula)                    

Output power: super pulse output 0.3-7W, peak value 450W,continuous output 0.3-25W

Laser output mode: continuous, single pulse, repeat pulse, super pulse, with the optional pixel laser handpiece for Pixel laser output mode

Conducting system: seven joints longer articulated arm(the most advanced conducting light system in the world and the only one in China). It could be operated in the scope of R=1.7m, which makes the operation more flexible    

Handpiece:multiple function handpiece and two kinds of focus lens for f=100mm and f=50mm. With the optional adapter, it could be used for orthopedic, gynaecology and ENT surgery 

Operation mode:controlled by a touch screen and with the engineer interface and the doctor interface  

Min. spot diameter:≤0.1mm, variable spot adjusting handpiece:0.1-2.5mm          

Pulse width: the minimum pulse width is 0.1ms  

The RF equipment has the cooling system of surface layer, and uses proprietary technology

to deliver radiofrequency energy to the deep layers of the skin and its underlying tissue. The

heat will accelerate the blood circle, lets the fibre structure shrink instantaneously, and

stimulates the renewal of collagen. In response, the collagen shrinks and remodels over time,

providing you with tighter skin, renewed facial contours.

Introduction:

Principle of RF CO2 Fractional Laser

CO2 Fractional Laser System fires a laser beam which is split into numbers of microscopic beams, producing tiny dot or fractional treatment zones within the selected target area only. Therefore, the heat of laser only passes deeply through the fractional damaged area. This allows the skin to heal much faster than if the whole area was treated. During the skin self-resurfacing, a great amount of collagen is produced for skin rejuvenation, eventually the skin will look much healthier and younger. 

8.4 inch big color touch LDC screen RF fractional CO2 laser acne scare removal system

Applications:

1. Acne scars

2. Eliminate the scar by traumatism or operation

3. Improve skin texture and minimize pore size

4. Rejuvenate neck ,arm, leg and hands

5. Renew and resurface the skin

6. Wrinkle removal

7.Pigmentation removal

Features& Advantages:

1. Reduced thermal damage to surrounding tissues

2. Rapid healing and minimal downtime

3. Adjustable scanning kinds of patterns and different sizes

4. Adjustable intensity from zero to maximum

Fuctions and treatment effect of elight ipl rf 

1.Permanent hair removal.

2.Smooth wrinkles, face-lifting
3.Deep flecks, epidermis flecks or pigment treating the telangiectasis
4.Promote collagen to grow, strengthen flexibility of skin
5.Acne treatment
6.Shrink the thick pore
7.For endogenous pigment: nevus of Ota, coffee spot, age pigment, freckle etc removal
8.For exogenous pigment: tattoo, eyeliner and eyebrow removal
9.Skin whitening
10.Striae gravidarum removal

5. Adjustable pulse duration

6. Automatic alarm Systems for operation and troubles

7. High return with no consumable costs

Application:

1. Application Range of Fractional treatment handpiece
    a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
    b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
    c. Reconstruction of photoaging skin.

2. Application Range of Incision Handpiece
    a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
    b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc

Specifications:

Wavelength: 10.6+ 0.1um

Beam Transmission System: 7-Articulation joint Spring-Balanced Light Guiding Arm.

Power:1--30W

Operate Mode:Ultra Pulse and Fractional Scan

Indication Beam : Green Semiconductor Laser(532nm,<5m W)

Operating Interface: 8.4" TFT color screen

Scanning area :Max20x20mm(HFLS)

Scanning patterns Number: 7 kinds

Scanning patterns Type:

Rectangular, Square, Ellipse, Circle, Rect, straight line, hexagon and triangle

Scanning speed:10m/s Continuous: 1~30W, Step Adjustable per 1 W

Pulse Interval Time: 0~999ms,Step Adjustable per 1 ms

Modulation: Frequency:0~999Hz, Step Adjustable per 1Hz

Cooling Systems: Built-in circulating water cooling

Treatment theory:

The CO2 laser produces a beam of infrared light with the principal wavelength centering around 9.4 and 10.6 micrometers. With fractional laser resurfacing, the laser beam is broken up or fractionated into many small micro beams which are separated. These small areas of untreated skin promote a much more rapid recovery and healing with less risk of complications. The small areas treated by the fractional micro beams, called micro treatment zones, cause sufficient laser injury to promote new collagen production and resultant facial skin rejuvenation.