Main Technical Parameters:    

Laser wavelength: 10.6µm                                                            

Laser unit:TEM00 module Co2 unit (best quality for the facula)                    

Output power: super pulse output 0.3-7W, peak value 450W,continuous output 0.3-25W

Laser output mode: continuous, single pulse, repeat pulse, super pulse, with the optional pixel laser handpiece for Pixel laser output mode

Conducting system: seven joints longer articulated arm(the most advanced conducting light system in the world and the only one in China). It could be operated in the scope of R=1.7m, which makes the operation more flexible    

Handpiece:multiple function handpiece and two kinds of focus lens for f=100mm and f=50mm. With the optional adapter, it could be used for orthopedic, gynaecology and ENT surgery 

Operation mode:controlled by a touch screen and with the engineer interface and the doctor interface  

Min. spot diameter:≤0.1mm, variable spot adjusting handpiece:0.1-2.5mm          

Pulse width: the minimum pulse width is 0.1ms  

Specifications

10600nm RF CO2 laser
8.4 inch colorful touch screen
Korean auto intelligent controller system
CE

2011 fractional laser fraxel laser equipment  E003 for spot pigment and wrinkle removal

1. Specification

Application:

 

1. Application Range of Fractional treatment handpiece
    a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
    b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
    c. Reconstruction of photoaging skin.

2. Application Range of Incision Handpiece
    a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
    b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc

RF co2 fractional laser
Laser type	10600nm    RF CO2 laser
Optical maser	RF laser
Operating system	Korean auto intelligent controller system
Output pattern	Circle, square, etc. 8 shapes for your option
Spot diameter	0.1-1.0mm
Laser power	60w
Display screen	8.4 inch colorful touch screen
Light transfer system	7 Joint hinged arm Guide light source
Dot interval	0.1-2.0mm
Treatment depth	0.1-2mm
Working volt	220V/50HZ  110V/60HZ
Dimension	53cm×38cm×139cm

Principle of RF CO2 Fractional Laser

 

CO2 Fractional Laser System fires a laser beam which is split into numbers of microscopic beams, producing tiny dot or fractional treatment zones within the selected target area only. Therefore, the heat of laser only passes deeply through the fractional damaged area. This allows the skin to heal much faster than if the whole area was treated. During the skin self-resurfacing, a great amount of collagen is produced for skin rejuvenation, eventually the skin will look much healthier and younger. 

2. The scope of treatment
Acne scars Actinic keratosis
Basal cell carcinoma
Burn debridement
Laser skin resurfacing
Eliminate the scar for Traumatism,operation
Improve texture tone and pore size
Erase unwanted brown spots
Smooth wrinkles around the eyes and mouth
Eliminate striae gravidarum 
Rejuvenate your neck, chest and hands etc.

3. Contact

web:

Trade Manger: cn220257150

Beijing Firstbeauty Medical Device Co.,Ltd.

 4. Comapring

 

 

If you are interested, please contact me! Best service is waiting for you from April Wang!

CO2 laser system

The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.

The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.