Specifications

Finger Pulse Oximeter
Assay&Diagnostic Apparatus
Small & lightweight design
Dual color OLED display
With CE approved

Assay&Diagnostic Apparatus Finger Pulse Oximeter SpO2 Monitor With CE M001

 

Fingertip Pulse Oximeter

Features 1. Small & lightweight design ( total 28g without batteries ) 2.Dual color OLED display 3.Display SpO2,PR,Pulse bar and Plethysmogram 4.6 display modes 5.Low power consumption, automatically power off  6.Battery-low indicator 7.2 AAA alkaline or rechargeable batteries 8.Adjustable brightness 9.Accommodates widest range of finger sizes from pediatric to adult   Standard Accessory 1.2 AAA Alkaline batteries    2.Operating manual 3.Hang string

 

Product Properties:

1  Operation of the product is simple and convenient

2  The product is small in volume, light in weight (total weight is about 50g including batteries) and convenient in carrying

3  Power consumption of the product is low and the two originally-equipped two AAA batteries can be operated continuously for 30 hours.

4  Low voltage warning will be indicated in visual window when battery voltage is ao low thab normal operation of the oximeter might be influenced.

5  The product will automatically be powered off when no signal is in the product for longer than 8 seconds.

 

Operation Instructions:

1 Installing two AAA batteries into battery cassette before covering its cover.

2 Nip the clamp as diagram

3 Plug one of fingers into rubber hole of the Oximeter (it is best to plug the finger thoroughly) before releasing the clamp

4 Press the switch button once on front panel.

5 Your finger do not tremble during the Oximeter is working. Your body is not recommended in moving status.

6 Read correspondent datum from display screen.

7 8 display modes

Brief Description of Front Panel

 

It is apparent the heart rate bargraph display corresponds with pulse rate.

 

Package:

Color box: 12*8*5cm

Qty/CTN:150PCS

N.W:19KG/G.W:20KG

 

M001 Pulse Fingertip oximeter

 

M001 pulse oximeter is a portable oxygen and pulse rate detection equipment, applies to health care sites, families,Oxygen Bar and medical institutions for oxygen and pulse rate detection.

 

Ultra-thin design ,concise fashion

Low power alarm,probe-off alarm,overrun alarm adjustable.

Inner flash memory for 24 hours storage,and upload to PC.

The display direction can be changed automatically,easy to view.

PI detection:blood stream perfusion index.

The main features are as follows:

 

1.Pulse rate value display, bar graph display

2.Pulse waveform display

3.Perfusion Index value display

4.Charge function: Lithium battery is the power supply and can be charged up time and again.

5.Low-power indication: low-power indication symbol appears before working abnormally which  is due to low-power.

6. Automatic power-off when there is no finger in device under measure interface in 5 seconds.

7. With direction sensor,the display direction can be changed by automatic or manual mode

8. Screen brightness can be adjusted

9.Pulse sound indication

10.With alarm function

11. With SpO₂ value and pulse rate value record function

12.The record data can be uploaded to the computer

13. It can be connected with oximeter probe

 

Display

Type: 65K color OLED display

Screen Resolution: 128*96

Parameters:SpO2, PR, PI,Pulse bar

Mode: 4 display modes

Brightness :Adjustable 4 levels

Technical specifications

Measurement of SpO₂

Measuring range: 0% to100%

Accuracy: When the SpO₂ measuring range is 70% to 100%,the permission of absolute error is ±2 Below 70% unspecified

Measurement of pulse rate

Measuring range:30bpm TO 250bpm

Accuracy: ±2 bpm or ±2% (select larger)

Resolution

SpO₂ : 1%, Pulse rate: 1bpm.

Measurement Performance in Weak Filling Condition

SpO₂ and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO₂ error is ±4%, pulse rate error is ±2 bpm or ±2% (select larger).

Resistance to surrounding light

The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ±1%.

 

Storage Environment

a) Temperature :-40+60'C

b) Relative humidity :5%-95%

c) Atmospheric pressure :500hPa-1060hPa

 

Operating Environment

a) Temperature:10C-40C

b) Relative Humidity :30%-75%

c) Atmospheric pressure:700hPa to 1060hPa

Dimensions:58(L) × 36(W) × 26(H) mm

Weight:About 45g (with a lithium battery)

Battery RequirementVoltage 3.7 rechargeable lithium battery

Power supply requirement: : 3.6 V DC ~ 4.2V DC.

 

Standard Accessories: 

-main unit

-USB cable

-software

-carrying case

-metal box

-hanging cord

-adapter