Newest 3 Handles E-light+RF+Nd Yag rf portable beauty machine E-16/ce/iso/equipment
USD $2,000 - $5,000 /Piece
Min.Order:1 Piece
Xi'an Taibo Electronic Technology Co., Ltd.
Newest 3 Handles E-light+RF+Nd Yag rf portable beauty machine E-16 has a very good effective to perfect skin.
E-light= IPL +Bipolar Radio Frequency + Skin Contact Cooling
Why Elight result is better than IPL:
Because mostly of energy of light will be reflected and refracted,so the real energy can reach the skin to fully absord is just 30%-40%.If enhancer more energy,it will hurt skin ,so Elight combined RF .Under the skin cooling system,RF energy can reach the dermis without hurt skin .so both energy for intense pulse light (lower than traditional IPL )and RF can stimulate collagen cell activity and then make it regeneration.
E-light Wavelength And Application:
*640nm,690nm—Hair removal
*530nm,560nm,580nm--Skinrejuvenation,Pigmentation Therapy, Acne Therapy
*480nm,430nm--Vascular Therapy
Specification:
Display | 8.4 inch touch display |
Stand handle | 12*30mm with 3 filters |
480nm-1200nm for red face, red nose, spider veins, acne 530nm-1200nm for skin rejuvenation, age spots, sun spots, pigmentation troubles 640nm-1200nm for hair removal 430nm,560nm,580nm,690nm for your choices | |
Energy | 0-50J/cm2(IPL) 0-20J/cm2(RF) |
Pulse width | 0.1-10.0ms |
Pulse number | 1-4 |
Pulse delay | 1-100ms |
Shot period(Frequency) | 1-5 second adjustable |
Lamp longevity | 40,000-60,000 shots |
Cooling system | Wind+water+semiconductor |
Power | 800W |
Voltage | AC 110V/220V,60Hz/50Hz |
Parts to buy: Protective glasses and goggle, extra lamp for E-light |
RF Part
Type For RF:Monopolar rf &Biopolar rf&Tripolar RF&Multipolar rf
Monopolar RF( temprature 68-72℃ ;depth:10~15mm ;Positive and negative poles not effect in the same interface ;need lead plate)
Biopolar RF(temprature (Above 62℃ ;depth:2~4mm ;Positive and negative poles effect in the same interface ,it is more safety )
Tripolar RF and multipolar rf:both skin lifting wrinkle removal and weight lose
Bipolar RF:
Theory:Collagen is the main structure of skin. However, the collagen and elastin will reduce and lack because of sun oxidation and air pollution as the time flies , As sustainment of skin, flexibility fiber and collagen fiber would gradually lose elasticity & tensility. Sagging skin, or other visible signs of aging will appear.
The RF equipment has the cooling system of surface layer, and uses proprietary technology to deliver radiofrequency energy to the deep layers of the skin and its underlying tissue. The heat will accelerate the blood circle, shrink the fiber structure instantaneously, and stimulates the renewal of collagen. In response, the collagen shrinks and remodels over time,providing you with tighter skin, renewed facial contours.
The Machine Detailed Application:
1.skin lifting
2.wrinkle removal
3.skin rejuvenation
4.anti aging
5.whelk and scar removal
Specification:
RF output power | 300W |
Energy | 0-20J/cm2 (adjustable) |
Probe | 10mm:for eyes & face |
20mm:for face & body | |
40mm:for body | |
RF Frequency | 600-1500KHz |
Power supply | 220V/110V 50Hz/60Hz |
Laser part
The specific laser wavelength will effect on and melanin of epidermis and dermis.The pigments will begin to swell and explode to tiny particles after absorbed this high energy laser.One part of them will be shot out of the body,the other parts will be gradually removed by metabolism.
Tighten skin,contract big pores:Spread specific fine carbon on face,after absolutely infiltrated in pores,then to shoot,it's easily burst the carbon particles to break out the spots and cutin of epidermis.The heat will stimulate regrowth of collagen,to tighten skin and shrink pores.
Application:
1) Removal of eyebrow line, eye line, lip line...etc
2) Removal of tattoo(red, blue, black...etc)
3) Clearance speckle, black naevus, fleck, age spots...etc
4) Removal of vascular lesion and spider vessel...etc
5)skin whitening
Technical Parameters:
Laser type | Q-switched ND:YAG laser |
Laser wavelength | 532mn & 1064mn & 1320nm |
Frequency | 1-5Hz |
Cooling system | Wind cooling +Water cooling |
Light source | 220V/110V 50Hz/60Hz |
The Machine Parts Detailed Specification:
Our Factory Brief Details:
Our Factory Detailed Exhibition in World:
The Customers Visit and User Photos:
ME: