40w CE Approved Co2 Fractional Laser / 0.1-2.6mm Medical Laser / Laser Equipment Co2 Fractional
USD $6,000 - $12,000 /Unit
Min.Order:1 Unit
Xi'an Taibo Electronic Technology Co., Ltd.
Technology of Ultrapulse
Mainly let the original average output of the laser energy concentrated in a very short period of time then output, due to the high pulse power, short time, and more round spot, the pressure on the surface from laser heat transfer effects is low (small heat-affected zone).
CE approved Co2 fractional laser / medical laser / beauty equipment
Working Theory of Co2 fractional machine
Co2 fractional resurfacing is a new laser treatment modality that creates numerous microscopic
thermal injury zones of controlled width, depth, and density that are surrounded by a reservoir of spared epidermal and dermal tissue, allowing for rapid repair of laser in induced thermal injury. This unique modality, if implemented with proper laser-delivery systems, enables high-energy treatment while minimizing risks.
Detailed Application of fractional machine
Cosmetic | Rhytides (Wrinkles) | Medical | Actinic keratosis (sun-damaged skin, precancerous lesions) |
Mottled dyspigmentation | Seborrheic keratosis (sun-damaged skin, lesions) | ||
Telangiectasia (Red Spots) | Sebaceous hyperplasia (yellow, shiny bumps on the face) | ||
Solar lentignes (Brown spots) | Rhinophyma (nose swelling and tissue over growth | ||
Large pores,Rough skin texture | Epidermal Melasma (Brown spots) |
Advantage of Co2
1. RF Laser Tube is more stable than traditional Glass tube, the machine is non serviceable.
2. RF Laser Tube makes the scanning dot much thinner and less harm.
3. The Laser Tube frequency can reach more than 5000HZ, high scanner can get better treatment effect.
4. Four working modes, CW, Pulse, Ultra Pulse ,one machine can been used in widely in different surgery.
5. Special designed energy self-inspected and energy-replenishment system ,improving the stability and effect.
6. Multi safety protection, water, electric ,remote interlock warning alarm.
7. Laser anti-leak designing, confirm the operator and client safety.
8. Whole low voltage system, no electric danger and no electric radiation
Specification of Co2
Laser source | RF Laser Tube (Manufactured by Coherent America) |
Working Mode | Fractional Mode: Continuous Wave Mode (CW) Pulse Mode (single and repeated) Ultra Pulse Mode |
Laser Wavelength | 10600nm |
Power of laser generator | Max 60W |
Output Power | 1-30W |
Focus Diameter | ≤0.1-1.2 mm |
Treatment Depth | Max 2mm |
Aiming Beam | Red Diode laser (650nm,≤5mW) |
Delivery System | 7-Articulation Joint Spring Arm |
Scanning Area | Max 20×20mm CO2 laser system The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis. The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate. |
Scanning shape | Ellipse, Rectangular, Triangular,Line ,Square, hexagon |
Scanning mode | Sequence Mode Middle split Mode Random Mode |
Smoke Exhausting System | Built-in air blow |
Cooling system | Air Cooling |
Environmental temperature | 5°C~40°C |
Relative Humidity | ≤80% |
Power Supply | ~220V±22V,50Hz±1Hz |
Dimension | 1280mm×520mm×680mm |
Weight | 45kg |
The Machine Parts of Co2
9*9mm Gynecology Scanning Head
----For Vaginal Tightening, Vaginal wall thickening,treatment of urinary
Our services Application: 1. Application Range of Fractional treatment handpiece 2. Application Range of Incision Handpiece
a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
c. Reconstruction of photoaging skin.
a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc
1). 2 years warranty with lifetime free service and maintenance
2). Free training for operation of equipment, which provided by our specialized training department.
3). On-line services, for example, technical consultancies provided by our skilled technique group concerning any
question of the laser equipment, and after-sale maintenance and more.
4). OEM/ODM services are available. We have our own developing and design department and manufacturin line, which ensure your required beauty equipment
5). Professional after-sale service team, solve all the problems in time
Our Factory Brief Details
Our Factory Detailed Exhibition in World
OUR VALUE MESSAGE IS “QUALITY IS OUR CULTURE”
“WITH US YOUR MONEY IN SAFE YOUR BUSINESS IN SAFE”
1. 100% after-sales quality assurance, Support Many payment method;
2. All other specifications of beauty equipment are available according to your requirement(OEM&ODM)! Factory price you will get from NUBWAY
3. We can provide professional operation training.
4. Nd yag laser, cryolipolysis machine, hair laser machine etc with CE certifications and strong supply ability.