CO2 laser system

The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.

The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.

beauty salon clinic use co2 fractional laser aesthetic equipment

3,Features:
-- Finish surgery rapidly
-- Instantaneous coagulation and safe operation
-- Reduction of edema and anaesthesia/analgesia
-- Less patient discomfort and good patient acceptance
-- Precision and control of operation
-- Clean ,astrictive and seamless surgery.
-- High efficiency, attracting more customers.

4,Basic treatment:
a. General Surgery: haemangioma, adipoma, steatoma, rectal cancer
b. Oral Surgery: epulis, buccal haemangioma, mucous cyst, lichen planum
c. Otolaryngology: auricle vegetation, nose tumour and tumor of paranasal sinus, benign tumour of oropharynx, gular haemangioma, vocal polyp, laryngo-carcinoma, chronic pharyngitis, chronic rhinitis, chronic laryngitis
d. Urology: meatus urinary condyloma, redundant prepuce, caruncle of urethra, polyp of penis
e. Gynecology: myoma of uterus, cervical erosion, cervical polyp, vagina condyloma
f.  Dermatology: wart, common wart, venereal wart, herpes labial, herpes zoster, nevus pigment, cutaneous malignant tumour
g. Cosmetology: dispel wringkle tache, stains of face nevus, vegetation and underarm odour

5,Specification:

Technology of Ultrapulse
Mainly let the original average output of the laser energy concentrated in a very short period of time then output, due to the high pulse power, short time, and more round spot, the pressure on the surface from laser heat transfer effects is low (small heat-affected zone).

6,Scanner Technical Specification:
1:Dot quantity :1-10000 dots at most
2:working mode: Fractional(Magic Pulse Technology)
3:Condenser focus : F=70mm
4:Spot size: Min:0.15mm at the focus
5:Interval Between 2 Centers : 0.2-2mm
6:Scanner Graphics : Square,rectangle,round or circle
7:Duty time : 100μs-10ms(adjustable)
8:Idle time : 0.01-1s
9:Treatment Size : 20X20mm²(adjustable)
10:Net weight : 0.5kg

7,Advantage of CO2 medical laser machine

Application:

1. Application Range of Fractional treatment handpiece
    a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
    b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
    c. Reconstruction of photoaging skin.

2. Application Range of Incision Handpiece
    a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
    b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc

1. It has selfchecking foundations, abnormal happened when you open the machine or in the process of the operation of the machine. 

The machine will stop by itself, avoid any accident.

2. There are two model, model A is scanned dot by dot, this model is used for, say, the scar is serious, and the 

treatment is fast.  Model B is scanned with dot irregularly, this model used for, say, the scar is not serious,

 and the advantage of Mode B is , clients feel less pain when use Mode B.

3. There are nine different graphics, and the size of the Graphics is adjustable. For different size scar, you can find the 

suitable graphics in this machine.

4 .when you compare with two different machines, even the parameter is same, the price is also a big different, 

because the material used on the machine is different. For example, the body shell of our CO2 fractional laser is 

ABS environmental material, which is staticfree material. Which is important to the life span of the machine, 

what’s more, the CO2 Glass tube in side of the machine, which is very very important to treatment stable.  

We adopt Germany made Glass tube. Which ensure the good treatment effect and long life span.

 Theory - co2 fractional laser