Product Details

CO2 laser system

The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.

The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.

2016 High Quality Multifunctional Fractional CO2 Laser Equipment with RF tube

fractional co2 laser theory:

The carbon dioxide laser (CO2 laser) was one of the earliest gas lasers to be developed (invented by Kumar Patel of Bell Labs in 1964, and is still one of the most useful. Carbon dioxide lasers are the highest-power continuous wave lasers that are currently available. They are also quite efficient: the ratio of output power to pump power can be as large as 20%.
The CO2 laser produces a beam of infrared light with the principal wavelength bands centering around 9.4 and 10.6 micrometers. With fractional laser resurfacing the laser beam is broken up or fractionated into many small micro beams which are separated so that when they strike the skin surface small areas of the skin between the beams are not hit by the laser and left intact. These small areas of untreated skin promote a much more rapid recovery and healing with less risk of complications. The small areas treated by the fractional micro beams, called micro treatment zones, cause sufficient laser injury to promote new collagen production and resultant facial skin rejuvenation.

fractional co2 laser applications:

Skin renewing and resurfacing;
Skin tightening;
Acne and acne scar removal;
Smooth burnt scars and surgery scars, dermabrasion etc-;
Remove intractable chloasmas and pigmentation;
Sun damage recovery

fractional co2 laser characters:

USA radio frequency laser
individual design of laser structure, greatly facility laser replacement and easy daily maintenance;
Display: 10.4” color touch LCD screen
Humanized software control, stable laser output, more safe
Smart articular arm, high accuracy
Excellent performance, not affect people’s normal life and study
Packing: aluminum alloy case

Treatment Interface:

Scanning Shapes:

You choose 6 different canning shaps,also you can change the size of scanning shaps at will according to your own needs.So the beam of light can achieve the treatment area accurately

square, rectangle, round, triangle, oval, 6-diamond shape and line

Specification:

Basic information	Wavelength	10.600 nm
	Pulsed radiofrequency	0.530 W
	Ultrapulse	1.Max power: 130W 2.Pulse width:200 to 500μs. you can choose
	Pulse	Average power: 40W Technology of Ultrapulse Mainly let the original average output of the laser energy concentrated in a very short period of time then output, due to the high pulse power, short time, and more round spot, the pressure on the surface from laser heat transfer effects is low (small heat-affected zone).
Matrix mode	Scan pattern	Square, rectangle, round, triangle, oval, 6-diamond shape, line or customized graphics
	Scan pattern size	0.1x0.1mm—20x20mm
	Dot quantity	400 dots at most
	Working state	ultrapulsed mode;
	Scan mode	free scan; Sequence scan; maximum distance scan
	Pulse duration	0.1-10ms
	Spot distance	0.1-2mm
	Pulse energy	1mj to 100mj is optional for each dot.
Technical specification	Laser apparatus	Sealed off laser device stimulated by direct current
	Condenser focus	f=50mm
	Beam divergence angle	0.3 mrad
	Spot size	≥0.2mm at the focus
	Radiation time / Interval time	0.01 1 s
	Aiming beam	635nm infrared ray
	Beam transport device	7 articular arm
Net weight		57 kg
Machine size		46x61x120cm
Power supply		220V/110V

Application:

1. Application Range of Fractional treatment handpiece
a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
c. Reconstruction of photoaging skin.

2. Application Range of Incision Handpiece
a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc

Picture shows:

WHAT CAUSES STRETCH MARKS?

Stretch marks occur when the elastic middle layer of skin called the dermis is stretched. Stretching leads to a breakdown of connective tissue, inflammation, and then scar formation as the injury heals. It's the scarring that causes stretch marks to appear.

Stretch marks are common during puberty and rapid growth spurts in adolescence, pregnancy, excessive weight gain and obesity, pregnancy, when muscle mass increases rapidly and stretches the skin (like during bodybuilding), and sometimes when individuals use steroids for many months. Stretch marks are not a health risk but can be cosmetically unappealing.

How do they look like?
Stretch marks often start off as reddish or purplish in color and then become glossy skin that appears streaked in silver or white.
.
Men and women can get stretch marks on several areas of their bodies, including the abdominal area, thighs, hips, breasts, upper arms or lower back.

Why Choose Us

Company Information

1. Credible beauty machine manufacturer and supplier

KM Group is located in the beautiful World Kite Capital Weifang, China.Our company engaged in research, developing, production, sales and after-sale kinds of beauty equipments,over 5 years golden member of Alibaba with Bureau Veritas,over 3years golden member of Made in China with SGS authentican

2. Authoritative Certificates Quality Assurance

Our products are ertified by CE1023,ISO13485,TUV,TGAetc

Our Services

Professional testing tool for best quality and excellent after sale service

Our company are very strict in quality of our beauty machine. Before delivery, our engineers will test every part and function of the machine, ensuring our customer can get the most excellent machine.

FAQ

After-Sale service

We supply product use training include the manual,DVD and online trainning .When a fault occurs , engineers and experts to provide guidance for the maintenance.

We have two years warranty and lifetime maintenance,we also can supply on-line service

Weifang KM Electronics Co.,Ltd

Jacky Yan

Skype:flyer0908

Whatsapp/viber/Tel: 0086-15064665250

Theory - co2 fractional laser

CO2 Fractional laser is the most advanced conceptual fractional CO2 skin peeling laser system with a wavelength of 10600nm. In addition to its fine skin-peeling effect, it can effectively penetrate the laser beam into the dermis . It is the most beneficial skin recovery system and can achieve the long-term effect of collagen remodeling as well as improvement of aged skin conditions due to exposure to light. It can be very safely applied to various types of scars compared to the existing 100% total layer skin peeling lasers (CO2 or Er: YAG). In addition, it does not require a long period of recovery or side effects. It can remodel various types of deformed scars and skin tissue very effectively.