Holland Electric Welded Wire Mesh/Wave-Shaped Wire Mesh/Wavy Mesh
USD $1 - $100 /Piece
Min.Order:10 Pieces
Anping Qianpu Wire Mesh Products Co., Ltd.
Anping Tenglu metal Wire Mesh Co.LTD
Holland Electric Welded Wire Mesh/Wave-Shaped Wire Mesh/Wavy Mesh
Holland Wire Mesh is also known as wave-shaped wire mesh, ocean wave welded fence, euro fence or wavy mesh. The panels and posts are jointed together with the special plastic clamp or hight strength stainless steel wire clamp. Deep green PVC coated holland electric welded wire meshes are beautiful appearance, smooth mesh, and it can resist the corrosive.
Material: High quality iron rod, Stainless steel wire, Low carbon steel wire, PVC coated wire.
Colors: moss green or grass green. Every other customs required RAL color can be delivered.
Processing: PVC coated after welding of steel wire. Electro galvanizing, hot-dip galvanizing or PVC coating can be done separately.
Holland Wire Mesh specifications:
Holland wire Fence
Size: 2".
wire dia. (before coat/after coat): 2.00 mm / 2.50 mm.
Width: 2 m.
Tensile Strength of wires: for 2.00 mm / 2.50 mm.
Horizontal wire: 400/550 N/mm2.
Vertical wire: 750/950 N/mm2.
Inside Wire: Electro galvanized.
Color: RAL 6005.
Wires: straight vertical wire and crimped horizontal wire.
Packing: packed in individually plastic shrink foil. both end protected by carton disk.
Post
Material: hot dipped galvanized then spray painted.
Thickness: 1.50 mm.
Length: 2.50 m.
Diameter: 48 mm.
Material: without galvanized and without spray painted. (black).
Thickness: 1.50 mm.
Length: 2.50 m.
Diameter: 48 mm.
Features of Holland Wire Mesh:
Fence: using high quality iron road as raw material, the welded panel or rolled fence, after galvanized, PVC coat, it can resistance the corrosive and ultraviolet radiation very strongly.
Application: Holland Wire Mesh (euro fence) is used as fencing, decoration or protection for various facilities in industry, agriculture, infrastructure, transport and so on. It can be used as garden fence and decorative fence.
Holland wire mesh size table | ||
Wire Diameter | Mesh of Aperture | |
Inch | MM | |
2.5 mm / 3.0 mm | 4" × 4" | 101.6mm × 101.6mm |
2.5 mm / 3.0 mm | 4" × 3" | 101.6 mm × 50.8 mm |
2.0 mm / 2.5 mm | 4" × 2" | 101.6 mm × 50.8 mm |
1.9 mm / 2.4 mm | 3" × 2" | 75 mm × 50.8 mm |
1.9 mm / 2.4 mm | 2" × 2" | 50.8 mm × 50.8 mm |
1.9 mm / 2.4 mm | 2" × 1" | 50.8 mm × 25.4 mm |