CE ISO approved Infusion Pump volumetric Automatic in hospital ICU CCU clinical medical equipment

Functions:

• Audible and visual alarm for occlusion, empty, low battery, end of infusion, door open, wrong setting etc, which gain patents
• HD LCD Display, high capacity words, friendly user interface, dynamically display working status
• Audible and visible alarm
  The pump has OCCLUSION, AIR IN LINE, DOOR OPEN, FINISH, LOW BATT, INTERRUPTION, ABNORMAL and DELAY OPERATION alarm functions
• AC/DC
  When the pump stops, purge function is ended to purge air out of line. Double click bolus button to purge. Contrarily, it infuses fast
• Flow rate setting
  Set the flow rate between: Drop/min, ml/h and time infusion volume
• Self-check after startup
  When power on, the pump executes a self-check. LCD display and all lamps will be lighten if it works normally. The corresponding lamp will be off if any part doesn’t work
• Accumulated volume display and clear
• Memory function
  Memory can keep the parameters which you set up last time over 8 years
• Flow rate calibration
  In order to make infusion accurate, calibrate the infusion set according to actual situation

Specifications:

Infusion Pump is a kind of volumetric Infusion Pump. 

It through microprocessor’s accurate control over precision stepper motor, 

drives mechanical transmission mechanism to spur the peristaltic sheet, 

to accurately control the infusion rate with the squeezing board and monitor 

the transfusion process by sensors. Therefore, it is a kind of 

high-precision intelligent infusion pump.

This instrument is applied in internal medicine, surgical, pediatrics, obstetrics

 and gynecology, ICU, CCU, operation room and other clinical infusion 

treatment (but not suitable for blood transfusion). It is especially suitable for 

clinical treatment that needs long-time, even, and accurate control 

of injection rate and supervision of infusion process.