Product Details

Technology of Ultrapulse
Mainly let the original average output of the laser energy concentrated in a very short period of time then output, due to the high pulse power, short time, and more round spot, the pressure on the surface from laser heat transfer effects is low (small heat-affected zone).

SC-2 Metal RF CO2 Fractional Laser Skin Care Device

Fractional resurfacing is a new laser treatment modality that creates numerous microscopic thermal injury zones of controlled width, depth, andd ensity that are surrounded by are servoir of spared epidermal and dermal tissue,all owing for rapid repair of laser-induced thermal injury.

Detail Application( Cosmetic and Medical Application):

Cosmetic Application	Rhytides (Wrinkles)	Medical Application	Actinic keratosis (sun-damaged skin, precancerous lesions)
	Mottled dyspigmentation		Seborrheic keratosis (sun-damaged skin, precancerous lesions)
	Telangiectasia (Red Spots)		Sebaceous hyperplasia (yellow, shiny bumps on the face)
	Solar lentignes (Brown spots)		Rhinophyma (nose swelling and tissue over growth
	Large pores,Rough skin texture		Epidermal Melasma (Brown spots)

Specifications

Laser source	RF Laser Tube (Manufactured by Coherent America)
Working Mode	Fractional Mode Continuous Wave Mode (CW) Pulse Mode (single and repeated) Ultra Pulse Mode
Laser Wavelength	10600nm
Power of laser generator	Max 60W
Output Power	1-30W
Focus Diameter	≤0.1-1.2 mm
Treatment Depth	Max 2mm
Aiming Beam	Red Diode laser (650nm,≤5mW)
Delivery System	7-Articulation Joint Spring Arm
Scanning Area	Max 20×20mm
Scanning shape	Ellipse, Rectangular, Triangular, Line Square hexagon
Smoke Exhausting System	Built-in air blow
Cooling system	Air Cooling
Environmental temperature	5°C~40°C
Relative Humidity CO2 laser system The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis. The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.	≤80%
Power Supply	~220V±22V,50Hz±1Hz
Dimension	450mm×550mm×1400mm
Weight	40kg

Advantage

RF Laser Tube is more stable than traditional Glass tube, the machine is non serviceable.
With the RF laser Tube, the scanning depth can reach the derma layer , to accelerate the collagen re-growth.
RF Laser Tube makes the scanning dot much thinner and less harm.
The Laser Tube frequency can reach more than 5000HZ, high scanner can get better treatment effect.
Four working modes ,Fractional, CW, Pulse, Ultra Pulse ,one machine can been used in widely in different surgery.
Special designed energy self-inspected and energy-replenishment system ,improving the stability and effect.Multi safety protection, water, electric ,remote interlock warning alarm.
Laser anti-leak designing, confirm the operator and client safety.
Whole low voltage system, no electric danger and no electric radiation.

Pictures

Notice Before Treatment

The patient should not take any medications containing aspirin (acetyl salicylic acid), high doses of vitamin E,eating garlic,consuming alcohol and smoking at least 2 weeks before and after the treatment.
The surgeon will decide whether preliminary examination sare necessary,such as blood tests,an electrocardiogram,or x-ray sof the lungs.If this is the case,these tests should be performed 2weeks before the surgery.
It is best not to wear any make up when the client comes in for the operation.
Wear loose clothing that doesn't need to be pulled over head; the client may also want to bring a scarf to cover the bandages on the way home.
Do not eat or drink anything for 6 hours before your operation.
Local anesthetic will be injected subcutaneously (under the skin).

Operation Procedure

Clean the skin.
About 20-30 minutes prior to treatment, apply a topical anesthetic to the treatment area.
Right before treatment beginning, wash off the anesthetic and apply a thin layer of the tracking gel.
Duringtreatment, apply cold air for patient comfort.
After treatment, use our semi-conductor laser (physiotherapy laser) to enhance the patient’s treatment experience and accelerate the benefits of treatment.

Application:

1. Application Range of Fractional treatment handpiece
a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
c. Reconstruction of photoaging skin.

2. Application Range of Incision Handpiece
a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc

Vaginal Treatment procedure

Use the digital endoscope to detect the 1 condition of privates.
Under the WIZ Scan Mode, insert the WIZ handpiece,Laser irradiation with 360-degreerevolution ,irradiating the laser Pulling out the handpiece by checking the scales on guide tip.
Under the RF Scan Mode, put the Laser Irradiation on Target area , Rejuvenation and whitening.

Packaging & Shipping

Our Services