400W Powerful E Light IPL+RF Hair Removal Skin Rejuvenation Redness Removal Equipment E Light Ipl Rf Remove Tiny Wrinkle
USD $1,000 - $3,000 /Set
Min.Order:1 Set
Beijing Quartuslaser Technology Co., Ltd.
How does it works?
IPL treatment is effective based on its selective absorbability. When the intense pulsed light penetrates the epidermis, the energy of light will be greatly absorbed by the pigments in epidermis. High energy and dark color skin will be with high risk in treatment. Moreover, majority of the heat is reflected andrefracted at the same time, only 30% to 40% of energy is utilizable. Therefore, it needs to increase the energy for a better treatment result. However, majority heat is absorbed by the pigments inepidermis, which directly block to use high energy for treatment, so that affects the single treatment result.
Principle of E-light hair removal
E-Light combines three advanced technologies: Bipolar Radio Frequency + IPL +Skin Contact Cooling.
When the three are united in one treatment, wonderful experience and result can be expected. The energy of Radio Frequency can reach to the deep skin layer and heat up tissue, thus, lower energy is applied during the IPL treatment. Uncomfortable feeling during the IPL treatment will be decreased significantly and better result can be expected. In addition, cooling system involved in E-light can also ease the uncomfortable feeling.
The radio frequency energy is not concerned with melanin. So, the E-Light treatment can get good result on the soft or thin hair so as to decrease the risk caused by traditional IPL treatment.
Application |
|
Features |
|
Technical parameters
E-light (IPL+RF) | Display: | 8.4 inch TFT color touch screen |
IPL power supply | 1200W | |
Light Conduction: | Sapphire coupling | |
Standard filters: | 430/480~1200 nm Acne removal | |
530~1200 nm Pigment removal | ||
560~1200 nm Skin rejuvenation | ||
580~1200 nm Vascular therapy | ||
640/690~1200 nm Hair removal | ||
Lamp longevity: | 100,000 shots | |
Energy Density: | 0-50J/cm2(IPL) 0-30J/cm2(RF) | |
Pulse Sequence: | 1-10 pulses | |
Pulse Width: | 1-9.9ms(same for every sub-pulse) | |
Pulse delay: | 1-40ms | |
Shot period: | 1-3 second adjust | |
Spot size: | 12mm*30mm / 15mm*50mm | |
RF | RF handle | Mono-polar / Bipolar(Optional) |
RF power supply | 600W | |
Energy Density | 1-50J/cm2 | |
Treatment probe | 10mm for eyes and face | |
20mm for face and neck | ||
40mm for body |
IPL Instruction
When IPL irradiates the skin, light energy with particular wavelength will be selectively absorbed by melanin
of hair follicles .When the heated temperature of follicles reaches high enough their structures will be
damaged irreversibly, finally to achieve the effect of removing the unwanted hair.
E-light handleRF handle
Curative effect contrast
package
aluminum alloy case
delivery
Company Certificate
Applications:
Skin rejuvenation: pores refining, improve rough, dark and gloomy skin, restore skin elasticity
Pigment treatment: freckles, sun-burn spots, senile plaque, pigmentation spots
Hair removal: armpit, chest, lip, arms, legs, beard, bikini etc.
Vascular, spider angioma, acne rosacea
Acne: pimples, improve seborrheic oily skin and acne scars