Vascular Lesions Removal Ipl Rf E-light Device/e-light Hair Back Hair Removal Removal Equipment/e Light Ipl Hair Removal Skin Lift
Negotiable /Unit
Min.Order:1 Unit
Beijing Quartuslaser Technology Co., Ltd.
The principle of IPL
Applying the technique of IPL and Bipolar Radio Frequency,the equipment acts on the entire skin corium and connective tissue,stimulates the collagen of different depth to realing and grow,the gets treatment effect.Biopolar RF release energy at the same time,with the selective absorbtion for the skin to light energy,various pathological tissues of corium and epidermis creates photothermolysis effect.Since light energy is far below conventional IPL,the pigment tissue and vascular pathological tissue of the corium and epidermis would absorb more energy without injuring the epidermis,and then remove these pathological tissue better and get the effect.
front and rear of the machine
front side of Elight+RF+Laser machine back side of Elight+RF+Laser machine
two screens
3 treatment tips
Application
1.E-light(IPL+RF):
Hair removal: Unwanted hair permanent removal
Pigment treatment: Freckles,sunspots, dot-like post-inflammatory hyperpigmentation age spots, melasma, liver spots, pregnancy spots
Skin rejuvenation: Tighten skin, fine wrinkles removal, whiten skin
Acne Treatment: Acne removal,shrink enlarged pores
Vascular lesion Therapy: Telangiectatic vessels ,unwanted leg veins,spider veins
2. RF (Mono-polar):
Wrinkles removal
Tighten skin, lift skin
Rebuild face outlines and body contours
Shrink large pores
3. ND: YAG laser:
All colors tattoo removal
Spots removal (freckle, coffee spots, age spots, nevus of Ota)
Embroidery lip-line, eye-line, eyebrow pigments removal
Technical parameters
E-light (IPL+RF)
| Display: | 8.4 inch TFT color touch screen |
IPL power supply | 1200W | |
Light Conduction: | Sapphire coupling | |
Standard filters: | 430/480~1200 nm Acne removal | |
530~1200 nm Pigment removal | ||
560~1200 nm Skin rejuvenation | ||
580~1200 nm Vascular therapy | ||
640/690~1200 nm Hair removal | ||
Lamp longevity: How does it works?
IPL treatment is effective based on its selective absorbability. When the intense pulsed light penetrates the epidermis, the energy of light will be greatly absorbed by the pigments in epidermis. High energy and dark color skin will be with high risk in treatment. Moreover, majority of the heat is reflected andrefracted at the same time, only 30% to 40% of energy is utilizable. Therefore, it needs to increase the energy for a better treatment result. However, majority heat is absorbed by the pigments inepidermis, which directly block to use high energy for treatment, so that affects the single treatment result. | 100,000 shots | |
Energy Density: | 0-50J/cm2(IPL) 0-30J/cm2(RF) | |
Pulse Sequence: | 1-10 pulses | |
Pulse Width: | 1-9.9ms(same for every sub-pulse) | |
Pulse delay: | 1-40ms | |
Shot period: | 1-3 second adjust | |
Spot size: | 12mm*30mm / 15mm*50mm | |
RF | RF handle | Mono-polar / Bipolar(Optional) |
RF power supply | 600W | |
Energy Density: | 1-50J/cm2 | |
Treatment probe: | 10mm for eyes and face | |
20mm for face and neck | ||
40mm for body | ||
ND:YAG Laser | Display: | 5.7 inch LCD screen |
laser power supply | 500W | |
Treatment heads: | 1064nm,532nm | |
| Power supply: | 220V/50Hz,110V/60Hz |
Specifications:
Dimension (before packing): 50*55*124cm
Net Weight: 50kg
Training: Operation CD and manual
certification
Dear friends,
thanks for your intereset,welcome you to contact me
IPL Instruction
When IPL irradiates the skin, light energy with particular wavelength will be selectively absorbed by melanin
of hair follicles .When the heated temperature of follicles reaches high enough their structures will be
damaged irreversibly, finally to achieve the effect of removing the unwanted hair.