After sales service:
1. Within one month, if the machine is of any big fails, we will send you a new machine.
2. Within one year, if you send back the equipment for repair, we will be responsible for the repair, including the changes of accessories; both of them are free of charge.
3. After two years, we offer to repair the machine, but we require for the cost of the changed parts, not for manual cost.
4. If the buyer has any questions from our technical department, we can supply on-line service.

NL-DT200 multifunction facial Micro-crystal Dermabrasion Machine

                                             Specification                                                         

              The theory of Crystal Microdermabrasion and Diamond Dermabrasion peeling   

1) Crystal Microdermabrasion:
Crystal Microdermabrasion: A procedure that uses fine crystals and a controlled vacuum to exfoliate the skin. After the treatment, the skin has improved texture and softness, as well as fewer imperfections such as wrinkles and acne scars. The skin is washed to remove excess oil and dirt. Then, a stream of aluminum oxide crystals is targeted over the area. The crystals abrade away old, dead skin cells, which the vacuum then picks up with gentle suction. This promotes the growth of collagen and new, rejuvenated skin. Moisturizers and sun block are then applied to the treated area.

2) Diamond Dermabrasion:
The diamond microdermabrasion (crystal-free) system replaces the micro-crystal flow with a diamond tip wand. Areas closer to the eyes and mouth can be abraded more accurately with diamond abrasion - no risk of stray crystals.
Provides a Non-Surgical skin resurfacing procedure by using sterile diamond heads to peel and rub off the dead cells at the top skin layer followed by vacuuming/suction removing particles along with any dirt and dead skin. This procedure removes skin debris, scars, blemishes, wrinkles and uneven pigmentation of the skin. Moderate usage of diamond dermabrasion accompanied with skin products that penetrate through the top skin layer and reach the dermis level help to replenish natural nutrients and restore cell activity promoting healthy skin

           the application of Crystal Microdermabrasion &

1 Improve skin regeneration and skin condition through wiping off cutis horniness.
2 Improve cell tissue, eliminate flaw.
3 Accelerate blood circulation, help regeneration of collagen and elastic collagen;Improve texture and increase skin elasticity.
4 Have good effect in curing the following problems:

The cutisthick horniness, lackluster, pigment uneven, crinkles, lack of elasticity, sunburn skin.
The middle cortexconcavo-convex holes, acne, lipid granule, dark-sore, wrinkles, pregnancy lines and comb tissue inflammation.

                                                 Characteristics                                                     
Crystal flow and vacuum pressure are controlled by two independent regulators.This makes it simpler and more accurate to administer the peeling process and thus reduces any chance to cause discomfort .This new system has been improved so no jam occurred in the crystal flow system and eradicated-hence foot pedal is no longer required in this new model.
3 Perfect design of the running-rod, with four holes, one releasing and the other recycling the crystal powder so as to avoid blocking the pipe and prevent to much powder remained on the surface.
A dehumidifier is attached to back of the equipment, it can avoid block caused by damp of powder.

Safety: in addition to the fuse, we also design ”current breaker” at the rear machine shell. It automatically stops all working immediately as electricity leakage, greatly protect people and equipment against any risk at the first time.

                                                  Advantage                                                        

1.Suitable for all skin types

2. Provides non-invasive, non-surgical procedure options

3.reliable for skin issues like wrinkles, fine lines, acne scare, uneven skin tone, and stretch marks

                                           The more pictures                                                   

                                            Packaging & Shipping    

                                                  Company Information  

We, Guangzhou Newlife Electronic Technology Co.,Ltd, are a professional manufacturer for beauty and aesthetic machines and equipments for over 5 years. Started with technology, Newlife team is the first company to achieve R&D members number is higher than Sales one, which ensure our production is 100% qualified and 0% after-sale problems with 1-2 years warranty.

 Technology and quality production are the two tracks of Newlife running train, the core of our competitiveness. Newlife is heading to the world. Come and check us.

                                                       Our Certificates  

                                                             FAQ

1. How long is the warranty good for?
A1. One year warranty.

2. What if any quality problems during guarantee period?
A2. We can provide free technical support and software upgrades. 

3.Can we print my Logo on the products? 
A3.Yes, we can. We support OEM .

4.What should I do if I don’t know how to use the machine?
A4.We have operation video and user manual for your reference, and also we  provide you 24 hours on line service.
    

 5.What's your transportation modes?
A5: We can transport the goods by air or by sea, it will be based on customer's requirement.

 Welcome to contact us  

for more information/products/distribution/OEM your own brand  

Web : http : //tcnewlife.en.china.cn/

Factory address:  Area West B.3F,No.81,Zijing Street, Dongsha RD, Liwan District, Guangzhou. 

 Send your Inquiry Details in the Below, Click "Send" Now! 

Advantage:

1.Strong energy and density

2.720 degree eddy of the treatment head

3.Bigger area irradiation,arc design of the light head suitable for the character of face

4.Control of the up-down pole for easy operation

5.One equipment with two different lights(red and blue),the keys for two lights can be easily switched

6.100% safety

7.No hurt to the skin cell,no side effect

8.Simple operation,no need of professional training

9.Longer lifetime,steady capability,longer continued word time

10.No special nurse and normal dressing for skin after treatment

11.Fit for any kind of skin

12.Matrix arrange of light source for face treatment