Product Details

IPL Instruction

When IPL irradiates the skin, light energy with particular wavelength will be selectively absorbed by melanin

of hair follicles .When the heated temperature of follicles reaches high enough their structures will be

damaged irreversibly, finally to achieve the effect of removing the unwanted hair.

Specifications

2. e light ipl rf hair removal
3. skin rejuvenation
4. handles tattoo removal

Hot!!! Professional high quality e light ipl rf machine

Front side of the E Light Machine

Back side of the E Light Machine

Treatment Handle of E Light Machine

Theory
When the three are united in one treatment, wonderful treatment experience and result can be expected. The energy of Radio Frequency can reach the middle and lower layer of the skin and heat up tissue, thus, lower energy be applied during the IPL treatment. Uncomfortable feeling during the IPL treatment will decreased significantly and the same even better result can be expected. In addition, cooling system involved in e light can also ease the uncomfortable feeling.

The absorbing of the energy of radio frequency is not concerned with melanin. So, the e light system can get good result on the soft or thin hair so as to decrease the risk caused by traditional IPL treatment.

Technical advantage
RF energy can be applied to any type of skin.
Used in deep color skin or light color soft hair.
RF combines with IPL, decrease the risk of burn and uncomfortable feeling significantly.
No side effect.
Special designed ISL device can ensure a safe treatment.
Easy to operate: the treatment tip is smart and can be applied on the skin directly.
Patent epidermal cooling skill makes clinical more comfortable and safe.

Application
Remove freckle, sun spot, age spot and acne.
Shrink the dilation of facial vascular.
Skin rejuvenation: smooth skin, remove wrinkles and fine lines, restore flexibility and tone of skin.
Hair removal: remove hair on any area of the body.
Skin tightening and reduce deeper winkles.
Reshape the face outlines, body figure reconstruction.
Enhance skin metabolism, skin whitening.
Resist face and body to become decrepit.

Curative effect contrast

Freckles treatment Hair removal treatment

Specification

Power Supply	220V 10A or 110V 20A
Power Output	400W/800W
RF Energy	1-50J/cm2
Pulse No	1-15
Discharge Interval	2-5s
First pulse duration	0.1-20ms
First pulse interval	1-50ms
Second pulse duration:	0.1-20ms The principle of IPL How does it works? IPL treatment is effective based on its selective absorbability. When the intense pulsed light penetrates the epidermis, the energy of light will be greatly absorbed by the pigments in epidermis. High energy and dark color skin will be with high risk in treatment. Moreover, majority of the heat is reflected andrefracted at the same time, only 30% to 40% of energy is utilizable. Therefore, it needs to increase the energy for a better treatment result. However, majority heat is absorbed by the pigments inepidermis, which directly block to use high energy for treatment, so that affects the single treatment result. Applying the technique of IPL and Bipolar Radio Frequency,the equipment acts on the entire skin corium and connective tissue,stimulates the collagen of different depth to realing and grow,the gets treatment effect.Biopolar RF release energy at the same time,with the selective absorbtion for the skin to light energy,various pathological tissues of corium and epidermis creates photothermolysis effect.Since light energy is far below conventional IPL,the pigment tissue and vascular pathological tissue of the corium and epidermis would absorb more energy without injuring the epidermis,and then remove these pathological tissue better and get the effect.
Second pulse interval	1-50ms
Repeated pulse duration	1.0-5.0ms
Handpiece Number	1-2(Optional)
Spot Size	15x50mm, 12x30mm (Optional)
Fixed Wavelength	560-1200nm,640-1200nm
Spectrum Range	430nm/480nm/530nm/560nm/640nm(690nm,750nm)---1200nm
Cooling System	semiconductor+ wind + water cooling system
Skin temperature	-5°C—+3°C
Display Screen	8.0 inch or 10.4 inch color touch LCD screen
Dimension	54x37x102cm
Weight	40kg+15kg

Unique advantage
1. Equipment with IC card, you can rent this equipment to other beauty salon

2. Unique Radiator for better cooling
3. Water level gauge easy to monitor the water
4. This equipment can also be made into one E-light handle plus one RF Handle
5. Metal frame inside, more stable during shipping
6. Our E-light lamp have big difference from other company, you don’t need to weld when changing it
7. We add good performance electrical filter to our machines. In order to provide stable working condition for the power supply of the machine, this fixing is used for filter the impurity of the power supply system. So the machine can perform better and has longer lifespan.
8. In order to make the energy output more stable, we adopt a unique technology with the resistors on the Capacitors

Package

Aluminum alloy case

Company certificate

Dear friends:

Thanks for your time and interest, we are waiting for your enquiry to offer best quotation.

Contact me at any time

skype id: jean.shang3

Applications:

Skin rejuvenation: pores refining, improve rough, dark and gloomy skin, restore skin elasticity

Pigment treatment: freckles, sun-burn spots, senile plaque, pigmentation spots

Hair removal: armpit, chest, lip, arms, legs, beard, bikini etc.

Vascular, spider angioma, acne rosacea