ultrasound rf vela shape,vela shape machine
USD $1 - $10,000 /Set
Min.Order:1 Set
Beijing Sincoheren Science And Technology Development Co., Ltd.
This non-surgical, non-invasive treatment for cellulite has four components, which together have been shown to be effective in tightening and smoothing skin: radiofrequency energy (RF), infrared light energy, and mechanical vacuum ,automatic rolling massage.
How it works
1. Skin-tightening and wrinkle removal
The infrared light and radio frequency can heat up the target tissue in the deep layer of the skin for proliferating the collagen and improving the blood circulation to tighten the loose skin of face and eyes round and removal the wrinkles.
2. Body shaping
High Frequency radio can heat up the fat under 5-15 cm of the skin and increase the diffusion of O2, further more to reinforce the substance exchange in and out of the cell., to promote the speed of body fat metabolism and to reallocate the water glycerin.
The energy of infrared light reinforce the flexibility of the skin, protect the epidermis and heat up the fat under the skin. The design of the vacuum and mechanical roll increases the blood supply and promotes the necessary release of catalyzing enzyme which the process of fat metabolism requires.
3. Cellulite removal
High frequency Radio frequency, which work together with the rolling vacuum massage can improve the blood circulation and increase the oxygen of the blood in targeted area. The lymphatic system will eliminate the waste and cure the fibrosis cellulite.
The heat can deep into the subcutaneous tissue to act the fibroblast of the connective tissue and restoring the collagen and elastic fibers.
Advantages:
1.Kumashape combines world leading technologies of cellulite reduction and body shape in one machine which can meet multi need of users.
2.Two different size treatment heads for different area treatment need.
3.Both big and small heads have the combined technologies of RF, Vacuum, infrared light.
4.Convenient design of adjusting parameters from display or handle piece, both is available.
5.Two modes design for different function need (shape mode and smooth mode )
6.djustable Radio frequency energy (10MHz, bipolar), Vacuum pressure, suction mode, and infrared light energy from level zero to level five which means operater can choose any single one as separate technology use or multi technologies use to meet different needs of clients
7.Kumashape has pulse vacuum and continual vacuum two modes for different result of treatment need.
8.Vacuum and screw structure rollers manipulate and smooth out the skin to facilitate safe and efficient energy delivery.
Before&After
Fetures:
10 Mhz Biopolar radiao frequency: on the two rolls can permeate into the layer 0.5-1.5cm under skin to work on the fat tissue effectively
High Radio Frequency: The power is up to 50W which can penetrates the deep skin and heats up deep fat.
Infrared light (650-2500 nm): It promotes the Hydrolyzed Collagen hyperplasia, improves blood circle and achieves the results of skin rejuvenation and skin whitening.
The design of the vacuum (0-50cm) and mechanical roll: Under action of the infrared light high radio frequency, mechanical movement makes the fat move which makes the skin more flexible and also increases the blood supply, further promotes the production of the catalyzing enzyme in the process fat metabolism
Kuma Shape & Vela Shape
| Characteristics comparison | |
Characteristics | Kuma shape | Vela shape |
Radio Frequency power | Up to 50W | Up to 50W |
Infrared power | Up to 20W | Up to 10W |
Spectrum range | 650 -2500 nm | 700-2000 nm |
Vacuum | 0-0.07MPa / 0-50Hg | Pulse |
Treatment handle size | Body: 50mm x 55 mm | Body: 40mm x 40 mm |
Weight | 30 kg | 27kg |
Dimension | 680*600*1100mm | 360*550*800mm |
Power | 230 VAC; 50/60 Hz | 50-60 Hz |
OEM/ODM Service:
1. Sincoheren has an integrated professional system for products research and development, manufacture, certificates identification, market promotion.
2. Completely and well organized SPDP procedure to develop products.
3. 50 people working for R&D depart
4. Sucessfully provide OEM/ODM service to USA distributor, Germany distributor, Turkey distributor, Australia distributor and so on.
Exhibitions
Our company was established in 1999, for now, our products have been sold to more than 100 countries, and we have sub-company in Germany and Australia for local sales and after-sale service.
Every year we will attend the International Exhibitions, such as Cosmoprof of Italy, Beauty Dusseldorf of Germany, Beauty Salon Melbourne of Australia, Dubai Derma, Beauty Eurasia of Turkey, Las Vegas, etc.