New Portable Mini 2000w 808nm Diode Laser Epilator Super Hair Removal Facial Hair Remover And Skin Treatment System
USD $3,200 - $3,200 /Set
Min.Order:1 Set
Beijing GGLT Science & Technology Co., Ltd.
Sapphire laser diode 808nm machine painless for permanent hair removal
CE Professional Use Equipments 808NM Stationary diode Pain Free Laser Hair Removal
Beijing Best seller Hair Removal 808nm Diode Lazer beauty equipment System Fast And Painless
Permanent Diode Laser Removing Hair Fastly for professional use in hospital and clinicn 808nm
gglt diodo 808 laser hair removal system 808nm diode laser hair reduction equipments
gglt diodo 808nm 100mw laser diode machine removing bikini hairs
New Portable Mini 2000w 808nm Diode Laser Epilator Super Hair Removal Facial Hair Remover And Skin Treatment System
Introduction:
Diode laser hair removal system is designed with TEC and sapphire cooling unit for skin contact. The laser beam is collimated with a patented beam shaping technology for a high efficiencyperformance. This rejuvenation system can be used for white to light brown skin with dark color hair. The pulse energy is up to 120J/cm2 or even higher upon request.
Applications:
Treatment theory:
Diode laser hair removal tech is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles; light can be absorbed and converted into heat to damage hair follicle tissue so that the hair can loss and without injury the surrounding tissue.
Painfree,effective, easy operation, safes technology and permanently.
Diode laser equipment adopts 808 nm+, particularly effective to hair follicle melanocytes without injury the surrounding tissue. The laser light can be absorbed by hair shaft and hair follicles in the melanin, and converted into heat, thus increasing the hair follicle temperature.
When the temperature raises high enough to irreversibly damage the hair follicle structure, which disappear after a period of natural physiological processes of hair follicles and thus achieve the purpose of permanent hair removal.
Interface:
Technical Parameters and Specifications:
Parameter | 360W | 720W |
Wavelength | 808nm+/-10nm | 808nm+/-10nm |
Pulse Width | 25ms~400ms |
|
Repetition Rate | 1Hz~10Hz | 1Hz~10Hz |
Energy Fluence | 0~10J/cm2 | 0~20J/cm2 |
Beam Type | Collimated | Un-collimated optional |
Skin Cooling | TEC + Sapphire | <5°C |
Laser Window | 10x16mm | 15X15mm |
Laser Cooling Liquid | Purified Water | Purified Water |
Water Tank Volume | ~3L | ~3L |
Handle Piece Flow Rate | 3.5~4.5L/min | 3.5~4.5L/min |
LCD Screen | 8’ Touch LCD | 8’~10.4’ Touch LCD |
Pedal Switch | Support | Support |
Environment Temperature | 5~28°C | 5~28°C |
Environment Moisture | <80% | <80% |
Input VAC | 220 or 110VAC optional | 220 or 110VAC optional |
Dimension | ~34x34x92cm | Optional |
Weight | ~40KG | Optional |
Accessories List
Part | Quantity | Note |
Laser Machine | 1 SET |
|
Handle Piece | 1 PC |
|
Pedal Switch | 1 PC |
|
Manual | 1 PC |
|
VAC Plug Wire | 1 PC | Not attached for OEM machines |
Water Tube | 1 PC | Not attached for OEM machines |
Plastic Funnel | 1 PC | Not attached for OEM machines |
System Basic Structures
Maintenance
1) The water must be checked and changed every 6 months.
2) The machine must be operated in a room with air-conditioner. The room temperature is better <28°C.
3) The environment temperature can not go below ZERO, or the ice may damage the water tanks and water channels inside the machine and the handle piece.
4) Clear the gel on the handle piece and make sure there is no dust attached on the handle piece window.
5) Do not bend the tube of the handle piece too hard, or this may cause flow switch ERROR.
6) Do not plug in & out the handle piece connectors frequently. This may cause bad connections and may cause water leakage or not well electrical connections.
7) Do not shot the laser at random targets, or it may cause burning or fire.
Compares of other hair removal ways:
Warranty Notice
Please take necessary protections for the operation of the machine and handle piece, and notice that following situations can not be warranted:
1) Operation the system without water.
2) Power up the system without connecting the handle piece.
3) Regular drops of the handle piece.
4) Wrong input VAC.
5) Other manual operating mistakes.